MURB1660CT Datasheet, PDF (5/5 Pages) Motorola, Inc – ULTRAFAST RECTIFIER 16 AMPERES 600 VOLTS

MURB1660CT, NRVUB1660CTT4G
PACKAGE DIMENSIONS
D²PAK−3 (TO−263, 3−LEAD)
CASE 418AJ
ISSUE B
E
E2
L1
H
e
NOTE 6
TOP VIEW
A
A
NOTE 3
D
B
SEATING
PLANE
c2
A
D1
DETAIL C
L2
A
c
2X b
SIDE VIEW
0.10 M B A M
M
L1
E1
NOTES:
1. DIMENSIONING AND TOLERANCING PER ASME
Y14.5M, 1994.
2. CONTROLLING DIMENSION: INCHES.
3. CHAMFER OPTIONAL
4. DIMENSIONS D AND E DO NOT INCLUDE MOLD
FLASH. MOLD FLASH SHALL NOT EXCEED 0.005
PER SIDE. THESE DIMENSIONS ARE MEASURED
AT THE OUTERMOST EXTREMES OF THE PLAS-
TIC BODY AT DATUM H.
5. THERMAL PAD CONTOUR IS OPTIONAL WITHIN
DIMENSIONS E, L1, D1 AND E1.
6. OPTIONAL MOLD FEATURE
0.10 M B A M
VIEW A−A
H
GAUGE
PLANE
L3
L
A1
DETAIL C
B
SEATING
PLANE
INCHES
DIM MIN MAX
A 0.160 0.190
A1 0.000 0.010
b 0.020 0.039
c 0.012 0.029
c2 0.045 0.065
D 0.330 0.380
D1 0.260 −−−−
E 0.380 0.420
E1 0.245 −−−−
e 0.100 BSC
H 0.575 0.625
L 0.070 0.110
L1 −−−− 0.066
L2 −−−− 0.070
L3 0.010 BSC
M 0°
8°
MILLIMETERS
MIN MAX
4.06 4.83
0.00 0.25
0.51 0.99
0.30 0.74
1.14 1.65
8.38 9.65
6.60 −−−−
9.65 10.67
6.22 −−−−
2.54 BSC
14.60 15.88
1.78 2.79
−−−− 1.68
−−−− 1.78
0.25 BSC
0°
8°
VIEW A−A
OPTIONAL CONSTRUCTIONS
RECOMMENDED
SOLDERING FOOTPRINT
0.436
STYLE 3:
PIN 1. ANODE
2. CATHODE
3. ANODE
4. CATHODE
0.653
0.366
2X
0.063
2X
0.169
0.100
PITCH
DIMENSIONS: INCHES
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [e-mail]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: [phone]
Japan Customer Focus Center
Phone: 81−3−5817−1050
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
http://onsemi.com
5
MURB1660CT/D