MC10LVEP16 Datasheet, PDF (5/10 Pages) ON Semiconductor – 2.5V / 3.3V ECL Differential Receiver/Driver

MC10LVEP16, MC100LVEP16
Table 8. 100EP DC CHARACTERISTICS, PECL V_CC = 3.3 V, V_EE = 0 V (Note 18)
−40°C
25°C
85°C
Symbol
Characteristic
Min Typ Max Min Typ Max Min Typ Max Unit
I_EE
V_OH
V_OL
V_IH
V_IL
V_BB
V_IHCMR
Power Supply Current
Output HIGH Voltage (Note 19)
Output LOW Voltage (Note 19)
Input HIGH Voltage (Single Ended)
Input LOW Voltage (Single Ended)
Output Voltage Reference (Note 20)
Input HIGH Voltage Common Mode
Range (Differential Configuration)
(Note 21)
19
24
29
22
28
34
24
30
36 mA
2155 2280 2405 2155 2280 2405 2155 2280 2405 mV
1355 1530 1700 1355 1530 1700 1355 1530 1700 mV
2135
2420 2135
2420 2135
2420 mV
1355
1700 1355
1700 1355
1700 mV
1775 1875 1975 1775 1875 1975 1775 1875 1975 mV
1.2
3.3 1.2
3.3 1.2
3.3
V
I_IH
Input HIGH Current
I_IL
Input LOW Current
D 0.5
D −150
150
0.5
−150
150
0.5
−150
150 mA
mA
NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit
board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared
operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit
values are applied individually under normal operating conditions and not valid simultaneously.
18. Input and output parameters vary 1:1 with V_CC. V_EE can vary +0.925 V to −0.5 V.
19. All loading with 50 W to V_CC − 2.0 V.
20. Single ended input CLK pin operation is limited to V_CC  3.0 V in PECL mode.
21. V_IHCMR min varies 1:1 with V_EE, V_IHCMR max varies 1:1 with V_CC. The V_IHCMR range is referenced to the most positive side of the differential
input signal.
Table 9. 100EP DC CHARACTERISTICS, NECL V_CC = 0 V, V_EE = −3.8 V to −2.375 V (Note 22)
−40°C
25°C
85°C
Symbol
Characteristic
Min Typ Max Min Typ Max Min Typ Max Unit
I_EE
V_OH
V_OL
V_IH
V_IL
V_BB
V_IHCMR
Power Supply Current
Output HIGH Voltage (Note 23)
Output LOW Voltage (Note 23)
Input HIGH Voltage (Single Ended)
Input LOW Voltage (Single Ended)
Output Voltage Reference (Note 24)
Input HIGH Voltage Common Mode
Range (Differential Configuration)
(Note 25)
19
24
29
22
28
34
24
30
36 mA
−1145 −1020 −895 −1145 −1020 −895 −1145 −1020 −895 mV
−1945 −1770 −1600 −1945 −1770 −1600 −1945 −1770 −1600 mV
−1165
−880 −1165
−880 −1165
−880 mV
−1945
−1600 −1945
−1600 −1945
−1600 mV
−1525 −1425 −1325 −1525 −1425 −1325 −1525 −1425 −1325 mV
V_EE+1.2
0.0
V_EE+1.2
0.0
V_EE+1.2
0.0
V
I_IH
Input HIGH Current
I_IL
Input LOW Current
D 0.5
D _−150
150
0.5
−150
150
0.5
−150
150 mA
mA
NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit
board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared
operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit
values are applied individually under normal operating conditions and not valid simultaneously.
22. Input and output parameters vary 1:1 with V_CC.
23. All loading with 50 W to V_CC − 2.0 V.
24. Single ended input CLK pin operation is limited to V_EE  −3.0 V in NECL mode.
25. V_IHCMR min varies 1:1 with V_EE, V_IHCMR max varies 1:1 with V_CC. The V_IHCMR range is referenced to the most positive side of the differential
input signal.
http://onsemi.com
5