MC10E136_08 Datasheet, PDF (5/12 Pages) ON Semiconductor – 5VECL 6-Bit Universal Up/Down Counter

MC10E136, MC100E136
Table 6. 10E SERIES NECL DC CHARACTERISTICS V_CCx = 0.0 V; V_EE = −5.0 V (Note 3)
0°C
25°C
85°C
Symbol
Characteristic
Min Typ Max Min Typ Max Min Typ Max Unit
I_EE
Power Supply Current
125 150
125 150
125 150 mA
V_OH
Output HIGH Voltage (Note 4) −1020 −930 −840 −980 −895 −810 −910 −815 −720 mV
V_OL
Output LOW Voltage (Note 4) −1950 −1790 −1630 −1950 −1790 −1630 −1950 −1773 −1595 mV
V_IH
Input HIGH Voltage
−1170 −1005 −840 −1130 −970 −810 −1060 −890 −720 mV
V_IL
Input LOW Voltage
−1950 −1715 −1480 −1950 −1715 −1480 −1950 −1698 −1445 mV
I_IH
Input HIGH Current
150
150
150 mA
I_IL
Input LOW Current
0.5
0.3
0.5 0.065
0.3
0.2
mA
NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit
board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared
operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit
values are applied individually under normal operating conditions and not valid simultaneously.
3. Input and output parameters vary 1:1 with V_CC. V_EE can vary −0.46 V / +0.06 V.
4. Outputs are terminated through a 50 W resistor to V_CC − 2.0 V.
Table 7. 100E SERIES PECL DC CHARACTERISTICS V_CCx = 5.0 V; V_EE = 0.0 V (Note 5)
0°C
25°C
85°C
Symbol
Characteristic
Min Typ Max Min Typ Max Min Typ Max Unit
I_EE
Power Supply Current
V_OH
Output HIGH Voltage (Note 6)
V_OL
Output LOW Voltage (Note 6)
V_IH
Input HIGH Voltage
V_IL
Input LOW Voltage
I_IH
Input HIGH Current
I_IL
Input LOW Current
125 150
125 150
140 170 mA
3975 4050 4120 3975 4050 4120 3975 4050 4120 mV
3190 3295 3380 3190 3255 3380 3190 3260 3380 mV
3835 3975 4120 3835 3975 4120 3835 3975 4120 mV
3190 3355 3525 3190 3355 3525 3190 3355 3525 mV
150
150
150 mA
0.5 0.3
0.5 0.25
0.5 0.2
mA
NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit
board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared
operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit
values are applied individually under normal operating conditions and not valid simultaneously.
5. Input and output parameters vary 1:1 with V_CC. V_EE can vary −0.46 V / +0.8 V.
6. Outputs are terminated through a 50 W resistor to V_CC − 2.0 V.
Table 8. 100E SERIES NECL DC CHARACTERISTICS V_CCx = 0.0 V; V_EE = −5.0 V (Note 7)
0°C
25°C
85°C
Symbol
Characteristic
Min Typ Max Min Typ Max Min Typ Max Unit
I_EEf
Power Supply Current
V_OH
Output HIGH Voltage (Note 8)
V_OL
Output LOW Voltage (Note 8)
V_IH
Input HIGH Voltage
V_IL
Input LOW Voltage
I_IH
Input HIGH Current
I_IL
Input LOW Current
125 150
125 150
140 170 mA
−1025 −950 −880 −1025 −950 −880 −1025 −950 −880 mV
−1810 −1705 −1620 −1810 −1745 −1620 −1810 −1740 −1620 mV
−1165 −1025 −880 −1165 −1025 −880 −1165 −1025 −880 mV
−1810 −1645 −1475 −1810 −1645 −1475 −1810 −1645 −1475 mV
150
150
150 mA
0.5 0.3
0.5 0.25
0.5 0.2
mA
NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit
board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared
operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit
values are applied individually under normal operating conditions and not valid simultaneously.
7. Input and output parameters vary 1:1 with V_CC. V_EE can vary −0.46 V / +0.8 V.
8. Outputs are terminated through a 50 W resistor to V_CC − 2.0 V.
http://onsemi.com
5