MC10E122_06 Datasheet, PDF (5/8 Pages) ON Semiconductor – 5V ECL 9-Bit Buffer

MC10E122, MC100E122
Table 7. AC CHARACTERISTICS V_CCx= 5.0 V; V_EE= 0.0 V or V_CCx= 0.0 V; V_EE= −5.0 V (Note 7)
0°C
25°C
85°C
Symbol
Characteristic
Min Typ Max Min Typ Max Min Typ Max Unit
f_MAX
Maximum Toggle Frequency
800
800
800
MHz
t_PLH
Propagation Delay to Output
ps
t_PHL
D to Q 150 350 500 150 350 500 150 350 500
t_SKEW Within-Device Skew
ps
D to Q (Note 10)
75
75
75
t_JITTER
t_r
t_f
Random Clock Jitter (RMS)
Rise/Fall Times
(20 - 80%)
<1
<1
<1
ps
ps
300 425 800 300 425 800 300 425 800
NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit
board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared
operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit
values are applied individually under normal operating conditions and not valid simultaneously.
9. 10 Series: V_EE can vary −0.46 V / +0.06 V.
100 Series: V_EE can vary −0.46 V / +0.8 V.
10. Within-device skew is defined as identical transitions on similar paths through a device.
11. Devices are designed to meet the AC specifications shown in the above table, after thermal equilibrium has been established. The circuit
is in a test socket or mounted on a printed circuit board and transverse air flow greater than 500 lfpm is maintained.
Q
Driver
Device
Q
Z_o = 50 W
Z_o = 50 W
50 W
50 W
D
Receiver
Device
D
V_TT
V_TT = V_CC − 2.0 V
Figure 3. Typical Termination for Output Driver and Device Evaluation
(See Application Note AND8020/D − Termination of ECL Logic Devices.)
http://onsemi.com
5