LP2951CDG Datasheet, PDF (5/22 Pages) ON Semiconductor – 100 mA, Low Power Low Dropout Voltage Regulator

LP2950, LP2951, NCV2951
ELECTRICAL CHARACTERISTICS (continued)
(V_in = V_O + 1.0 V, I_O = 100 mA, C_O = 1.0 mF, T_A = 25C [Note 8], unless otherwise noted.)
Characteristic
Symbol
Min
Typ
Line Regulation (V_in = V_O(nom) +1.0 V to 30 V) (Note 9)
LP2950C−XX/LP2951C/LP2951C−XX/NCV2951C*
LP2950AC−XX/LP2951AC/LP2951AC−XX/NCV2951AC*
Reg_line
−
−
0.08
0.04
Load Regulation (I_O = 100 mA to 100 mA)
LP2950C−XX/LP2951C/LP2951C−XX/NCV2951C*
Reg_load
−
0.13
LP2950AC−XX/LP2951AC/LP2951AC−XX/NCV2951AC*
−
0.05
Dropout Voltage
I_O = 100 mA
I_O = 100 mA
Supply Bias Current
I_O = 100 mA
I_O = 100 mA
Dropout Supply Bias Current (V_in = V_O(nom) − 0.5 V,
I_O = 100 mA) (Note 9)
V_I − V_O
−
30
−
350
I_CC
−
93
−
4.0
I_CCdropout
−
110
Current Limit (V_O Shorted to Ground)
I_Limit
−
220
Thermal Regulation
Reg_thermal
−
0.05
Output Noise Voltage (10 Hz to 100 kHz) (Note 10)
C_L = 1.0 mF
C_L = 100 mF
LP2951A/LP2951AC Only
V_n
−
126
−
56
Reference Voltage (T_A = 25C)
LP2951C/LP2951C−XX/NCV2951C*
LP2951AC/LP2951AC−XX/NCV2951AC*
V_ref
1.210
1.235
1.220
1.235
Reference Voltage (T_A = − 40 to +125C)
LP2951C/LP2951C−XX/NCV2951C*
LP2951AC/LP2951AC−XX/NCV2951AC*
V_ref
1.200
−
1.200
−
Reference Voltage (T_A = − 40 to +125C)
I_O = 100 mA to 100 mA, V_in = 23 to 30 V
LP2951C/LP2951C−XX/NCV2951C*
LP2951AC/LP2951AC−XX/NCV2951AC*
V_ref
1.185
−
1.190
−
Feedback Pin Bias Current
I_FB
−
15
Error Comparator
Output Leakage Current (V_OH = 30 V)
I_lkg
−
0.01
Output Low Voltage (V_in = 4.5 V, I_OL = 400 mA)
V_OL
−
150
Upper Threshold Voltage (V_in = 6.0 V)
V_thu
40
45
Lower Threshold Voltage (V_in = 6.0 V)
V_thl
−
60
Hysteresis (V_in = 6.0 V)
V_hy
−
15
Shutdown Input
Input Logic Voltage
Logic “0” (Regulator “On”)
Logic “1” (Regulator “Off”)
V_shtdn
0
−
2.0
−
Shutdown Pin Input Current
V_shtdn = 2.4 V
V_shtdn = 30 V
I_shtdn
−
35
−
450
Regulator Output Current in Shutdown Mode
I_off
−
3.0
(V_in = 30 V, V_shtdn = 2.0 V, V_O = 0, Pin 6 Connected to Pin 7)
6. The Junction−to−Ambient Thermal Resistance is determined by PCB copper area per Figure 29.
7. ESD data available upon request.
8. Low duty pulse techniques are used during test to maintain junction temperature as close to ambient as possible.
9. V_O(nom) is the part number voltage option.
10. Noise tests on the LP2951 are made with a 0.01 mF capacitor connected across Pins 7 and 1.
*NCV prefix is for automotive and other applications requiring site and change control.
Max
0.20
0.10
0.20
0.10
80
450
120
12
170
300
0.20
−
−
1.260
1.250
1.270
1.260
1.285
1.270
40
1.0
250
−
95
−
0.7
30
50
600
10
Unit
%
%
mV
mA
mA
mA
mA
%/W
mVrms
V
V
V
nA
mA
mV
mV
mV
mV
V
mA
mA
http://onsemi.com
5