|
AMIS-30663_14 Datasheet, PDF (5/11 Pages) ON Semiconductor – High Speed CAN Transceiver | |||
|
◁ |
AMISâ30663
Table 5. Absolute Maximum Ratings
Symbol
Parameter
Conditions
Min.
Max.
Unit
VCC
V33
VCANH
VCANL
VTxD
VRxD
VREF
Supply voltage
I/O interface voltage
DC voltage at pin CANH
DC voltage at pin CANL
DC voltage at pin TxD
DC voltage at pin RxD
DC voltage at pin VREF
0 < VCC < 5.25 V; no time limit
0 < VCC < 5.25 V; no time limit
â0.3
â0.3
â45
â45
â0.3
â0.3
â0.3
+7
V
+7
V
+45
V
+45
V
VCC + 0.3
V
VCC + 0.3
V
VCC + 0.3
V
Vtran(CANH)
Vtran(CANL)
Vtran(VREF)
Vesd(CANL/CANH)
Transient voltage at pin CANH
Transient voltage at pin CANL
Transient voltage at pin VREF
Electrostatic discharge voltage at
CANH and CANL pin
(Note 2)
(Note 2)
(Note 2)
(Note 3)
(Note 6)
â150
â150
â150
â8
â500
+150
V
+150
V
+150
V
+8
kV
+500
V
Vesd
Electrostatic discharge voltage at all
other pins
(Note 4)
(Note 6)
â4
â250
+4
kV
+250
V
Latchâup
Static latchâup at all pins
(Note 5)
100
mA
Tstg
Storage temperature
â55
+155
°C
Tamb
Ambient temperature
â40
+125
°C
Tjunc
Maximum junction temperature
â40
+150
°C
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
2. Applied transient waveforms in accordance with âISO 7637 part 3â, test pulses 1, 2, 3a and 3b (see Figure 4).
3. Standardized human body model system ESD pulses in accordance to IEC 1000.4.2.
4. Standardized human body model ESD pulses in accordance to MIL883 method 3015. Supply pin 8 is ±4 kV.
5. Static latchâup immunity: static latchâup protection level when tested according to EIA/JESD78.
6. Standardized charged device model ESD pulses when tested according to EOS/ESD DS5.3â1993.
Table 6. Thermal Characteristics
Symbol
Parameter
Rth(vjâa)
Rth(vjâs)
Thermal resistance from junction to ambient in SO8 package
Thermal resistance from junction to substrate of bare die
Conditions
In free air
In free air
Value
Unit
145
K/W
45
K/W
Table 7. DC Characteristics
(VCC = 4.75 to 5.25 V; V33 = 2.9 V to 3.6 V; Tjunc = â40 to +150°C; RLT = 60 W unless specified otherwise.)
Symbol
Parameter
Conditions
Min.
Typ.
Supply (pin VCC and pin V33)
ICC
Supply current
I33
I/O interface current
Dominant; VTXD = 0 V
45
Recessive; VTXD = VCC
4
V33 = 3.3 V;
CL = 20 pF; recessive
I33
I/O interface current (Note 7)
V33 = 3.3 V;
CL = 20 pF; 1 Mbps
Transmitter Data Input (pin TxD)
VIH
HIGHâlevel input voltage
VIL
LOWâlevel input voltage
IIH
HIGHâlevel input current
IIL
LOWâlevel input current
7. Not tested on ATE.
Output recessive
Output dominant
VTxD = V33
VTxD = 0 V
2.0
â0.3
â1
â50
â
â
0
â200
Max.
Unit
65
mA
8
1
mA
170
mA
VCC
V
+0.8
V
+1
mA
â300
mA
http://onsemi.com
5
|
▷ |