LC74735YW Datasheet, PDF (45/52 Pages) ON Semiconductor – Mini Buck Converter for RF Power Amplifiers

LC74735YW
Color Table write
• Write start address specification
Use command 70 to set the color table write start address.
CTN1: Color table specification (No.1, No.2), CTA3 to 0: Address specification
No.1
R
0000
0001
0010
XXX
G
XXX
B
XXX
No.2
R
0000
0001
0010
XXX
G
XXX
B
XXX
Address
1110
1111
1110
1111
• Data write
Continuous write mode differs depending on the write mode specification. (RM3)
1 Normal (RM3 = 0: initial state) *Continuous mode not used*
-- COM71-1 71-2-1 71-2-2 command wait state ---
2 Write continuous (RM3 = 1) mode
COM71-1 71-2-1 71-2-2
*: In mode 2, the IC remains locked in continuous write mode until the CS pin is set high.
• The write address is automatically incremented.
• The write address is retained unless the IC is reset or a new write address is issued.
No. 7545-45/52