NLV17SZ07 Datasheet, PDF (4/6 Pages) ON Semiconductor – Single Non-Inverting Buffer with Open Drain Output

NLV17SZ07
AC ELECTRICAL CHARACTERISTICS t_R = t_F = 2.5 ns; C_L = 50 pF; R_L = 500 W
T_A = 25°C
Symbol
Parameter
t_PZL Propagation Delay
(Figure 3 and 4)
Condition
R_{L =} R₁= 500 W, C_L = 50 pF
V_CC (V) Min
1.8 ± 0.15 0.8
2.5 ± 0.2 1.2
Typ Max
5.3 11.6
3.7 5.8
3.3 ± 0.3 0.8 2.9 4.4
5.0 ± 0.5 0.5 2.3 3.5
t_PLZ Propagation Delay
(Figure 3 and 4)
R_{L =} R₁= 500 W, C_L = 50 pF 1.8 ± 0.15 0.8
2.5 ± 0.2 1.2
5.3 11.6
2.8 5.8
3.3 ± 0.3 0.8 2.1 4.4
5.0 ± 0.5 0.5 1.4 3.5
−55°C ≤T_A ≤ 125°C
Min
Max Unit
0.8
12.0
ns
1.2
6.4
0.8
4.8
0.5
3.9
0.8
1.20
ns
1.2
6.4
0.8
4.8
0.5
3.9
CAPACITIVE CHARACTERISTICS
Symbol
Parameter
Condition
Typical
Unit
C_IN
Input Capacitance
V_CC = 5.5 V, V_I = 0 V or V_CC
u2.5
pF
C_OUT Output Capacitance
V_CC = 5.5 V, V_I = 0 V or V_CC
4.0
pF
C_PD Power Dissipation Capacitance (Note 6)
10 MHz, V_CC = 5.5 V, V_I = 0 V or V_CC
4.0
pF
6. C_PD is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption without load.
Average operating current can be obtained by the equation: I_CC(OPR) = C_PD  V_CC  f_in ) I_CC. C_PD is used to determine the no−load dynamic
power consumption; P_D = C_PD  V_CC2  f_in ) I_CC  V_CC.
A
50%
t_PZL t_PLZ
Y
50% V_CC
V_CC
GND
HIGH
IMPEDANCE
V_OL )0.3 V
Figure 3. Switching Waveforms
PULSE
GENERATOR
V_CC
DUT
R_T
R₁
C_L
R_L
V_CC 2
R_T = Z_OUT of pulse generator (typically 50 Ω)
Figure 4. Test Circuit
www.onsemi.com
4