|
NCL30080_15 Datasheet, PDF (4/25 Pages) ON Semiconductor – Quasi-Resonant Primary Side Current-Mode Controller | |||
|
◁ |
NCL30080
Table 2. MAXIMUM RATINGS TABLE
Symbol
Rating
Value
Unit
VCC(MAX)
ICC(MAX)
VDRV(MAX)
IDRV(MAX)
VMAX
IMAX
VZCD(MAX)
IZCD(MAX)
RθJâA
TJ(MAX)
Maximum Power Supply voltage, VCC pin, continuous voltage
Maximum current for VCC pin
Maximum driver pin voltage, DRV pin, continuous voltage
Maximum current for DRV pin
Maximum voltage on low power pins (except pins DRV and VCC)
Current range for low power pins (except pins ZCD, DRV and VCC)
Maximum voltage for ZCD pin
Maximum current for ZCD pin
Thermal Resistance, JunctionâtoâAir
Maximum Junction Temperature
Operating Temperature Range
â0.3, +35
Internally limited
â0.3, VDRV (Note 1)
â500, +800
â0.3, +5.5
â2, +5
â0.3, +10
â2, +5
360
150
â40 to +125
V
mA
V
mA
V
mA
V
mA
°C/W
°C
°C
Storage Temperature Range
â60 to +150
°C
ESD Capability, HBM model (Note 2)
4
kV
ESD Capability, MM model (Note 2)
200
V
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
1. VDRV is the DRV clamp voltage VDRV(high) when VCC is higher than VDRV(high). VDRV is VCC unless otherwise noted.
2. This device series contains ESD protection and exceeds the following tests: Human Body Model 4000 V per JEDEC JESD22âA114âF and
Machine Model Method 200 V per JEDEC JESD22âA115âA.
3. This device contains latchâup protection and exceeds 100 mA per JEDEC Standard JESD78 except for VIN pin which passes 60 mA.
www.onsemi.com
4
|
▷ |