MMBT1010LT1 Datasheet, PDF (4/4 Pages) Motorola, Inc – PNP GENERAL PURPOSE DRIVER TRANSISTORS SURFACE MOUNT

MMBT1010LT1 MSD1010T1
A
L
3
BS
1
2
V
G
C
D
H
PACKAGE DIMENSIONS
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. MAXIUMUM LEAD THICKNESS INCLUDES
LEAD FINISH THICKNESS. MINIMUM LEAD
THICKNESS IS THE MINIMUM THICKNESS OF
BASE MATERIAL.
K
J
INCHES
DIM MIN MAX
A 0.1102 0.1197
B 0.0472 0.0551
C 0.0350 0.0440
D 0.0150 0.0200
G 0.0701 0.0807
H 0.0005 0.0040
J 0.0034 0.0070
K 0.0140 0.0285
L 0.0350 0.0401
S 0.0830 0.1039
V 0.0177 0.0236
MILLIMETERS
MIN MAX
2.80 3.04
1.20 1.40
0.89 1.11
0.37 0.50
1.78 2.04
0.013 0.100
0.085 0.177
0.35 0.69
0.89 1.02
2.10 2.64
0.45 0.60
CASE 318–08
ISSUE AF
SOT–23
STYLE 6:
PIN 1.
2.
3.
BASE
EMITTER
COLLECTOR
A
L
3
S
B
2
1
D
G
C
H
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: MILLIMETER.
MILLIMETERS
INCHES
DIM MIN MAX MIN MAX
A 2.70 3.10 0.1063 0.1220
B 1.30 1.70 0.0512 0.0669
C 1.00 1.30 0.0394 0.0511
D 0.35 0.50 0.0138 0.0196
G 1.70 2.10 0.0670 0.0826
H 0.013 0.100 0.0005 0.0040
J 0.09 0.18 0.0034 0.0070
K 0.20 0.60 0.0079 0.0236
L 1.25 1.65 0.0493 0.0649
S 2.50 3.00 0.0985 0.1181
J
STYLE 1:
K
PIN 1. EMITTER
2. BASE
3. COLLECTOR
CASE 318D–04
ISSUE F
SC–59
Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and
specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Motorola
data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals”
must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of
others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other
applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury
or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola
and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees
arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that
Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal
Opportunity/Affirmative Action Employer.
How to reach us:
USA / EUROPE / Locations Not Listed: Motorola Literature Distribution;
P.O. Box 5405, Denver, Colorado 80217. 303–675–2140 or 1–800–441–2447
Mfax is a trademark of Motorola, Inc.
JAPAN: Nippon Motorola Ltd.: SPD, Strategic Planning Office, 4–32–1,
Nishi–Gotanda, Shinagawa–ku, Tokyo 141, Japan. 81–3–5487–8488
Mfax™: [e-mail] – TOUCHTONE 602–244–6609
ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park,
– US & Canada ONLY 1–800–774–1848 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852–26629298
INTERNET: http://motorola.com/sps
4
◊
Motorola Small–Signal Transistors, FETs and Diodes^MD^Me^Bv^Tic¹e⁰¹D^0La^Tta^1/D