|
MC74VHC4051DTR2G Datasheet, PDF (4/17 Pages) ON Semiconductor – High−Performance Silicon−Gate CMOS | |||
|
◁ |
MC74VHC4051, MC74VHC4052, MC74VHC4053
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ MAXIMUM RATINGS*
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ Symbol
Parameter
Value
Unit
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ VCC Positive DC Supply Voltage (Referenced to GND) â 0.5 to + 7.0
V
(Referenced to VEE) â 0.5 to + 14.0
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ VEE Negative DC Supply Voltage (Referenced to GND)
â 7.0 to + 5.0
V
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ VIS AnalogInputVoltage
VEE â 0.5 to
V
VCC + 0.5
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ Vin Digital Input Voltage (Referenced to GND)
â 0.5 to VCC + 0.5 V
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ I
DC Current, Into or Out of Any Pin
± 25
mA
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ PD Power Dissipation in Still Air
SOIC Packageâ
500
mW
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ TSSOP Packageâ
450
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ Tstg Storage Temperature Range
â 65 to + 150
_C
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ TL Lead Temperature, 1 mm from Case for 10 Seconds
260
_C
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ *Maximum Ratings are those values beyond which damage to the device may occur.
Functional operation should be restricted to the Recommended Operating Conditions.
This device contains protection
circuitry to guard against damage
due to high static voltages or electric
fields. However, precautions must
be taken to avoid applications of any
voltage higher than maximum rated
voltages to this highâimpedance cir-
cuit. For proper operation, Vin and
Vout should be constrained to the
range GND v (Vin or Vout) v VCC.
Unused inputs must always be
tied to an appropriate logic voltage
level (e.g., either GND or VCC).
Unused outputs must be left open.
â Derating â SOIC Package: â 7 mW/_C from 65_ to 125_C
TSSOP Package: â 6.1 mW/_C from 65_ to 125_C
RECOMMENDED OPERATING CONDITIONS
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ Symbol
Parameter
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ VCC Positive DC Supply Voltage
(Referenced to GND)
(Referenced to VEE)
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ VEE Negative DC Supply Voltage, Output (Referenced to GND)
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ VIS
Analog Input Voltage
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ Vin
Digital Input Voltage (Referenced to GND)
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ VIO* Static or Dynamic Voltage Across Switch
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ TA
Operating Temperature Range, All Package Types
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ tr, tf
Input Rise/Fall Time
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ (Channel Select or Enable Inputs)
VCC = 2.0 V
VCC = 3.0 V
VCC = 4.5 V
VCC = 6.0 V
Min Max Unit
2.0 6.0 V
2.0 12.0
â 6.0 GND V
VEE VCC
V
GND VCC V
1.2 V
â 55 + 125 _C
0 1000 ns
0 800
0 500
0 400
*For voltage drops across switch greater than 1.2V (switch on), excessive VCC current may be
drawn; i.e., the current out of the switch may contain both VCC and switch input components.
The reliability of the device will be unaffected unless the Maximum Ratings are exceeded.
http://onsemi.com
4
|
▷ |