MC74LCXU04DTG Datasheet, PDF (4/8 Pages) ON Semiconductor – Low-Voltage CMOS Unbuffered Hex Inverter

MC74LCXU04
AC CHARACTERISTICS (t_R = t_F = 2.5 ns; R_L = 500 W) (Note 3)
Limits
Symbol
t_PLH
t_PHL
Parameter
Propagation Delay
Input to Output
Waveform
1
V_CC = 3.3 V ± 0.3 V
C_L = 50 pF
Min
Max
1.0
3.6
1.0
3.6
T_A = −40°C to +85°C
V_CC = 2.7 V
C_L = 50 pF
Min
Max
1.0
4.5
1.0
4.5
V_CC = 2.5 V ± 0.2 V
C_L = 30 pF
Min
Max
1.0
4.3
1.0
4.3
Units
ns
t_OSHL Output−to−Output Skew
1.0
ns
t_OSLH (Note 4)
1.0
3. These AC parameters are preliminary and may be modified.
4. Skew is defined as the absolute value of the difference between the actual propagation delay for any two separate outputs of the same device.
The specification applies to any outputs switching in the same direction, either HIGH−to−LOW (t_OSHL) or LOW−to−HIGH (t_OSLH); parameter
guaranteed by design.
DYNAMIC SWITCHING CHARACTERISTICS
Symbol
Characteristic
Condition
T_A = +25°C
Min Typ Max
Units
V_OLP Dynamic LOW Peak Voltage
V_CC = 3.3 V, C_L = 50 pF, V_IH = 3.3 V, V_IL = 0 V
0.8
V
(Note 5)
V_CC = 2.5 V, C_L = 30 pF, V_IH = 2.5 V, V_IL = 0 V
0.6
V_OLV Dynamic LOW Valley Voltage
V_CC = 3.3 V, C_L = 50 pF, V_IH = 3.3 V, V_IL = 0 V
−0.8
V
(Note 5)
V_CC = 2.5 V, C_L = 30 pF, V_IH = 2.5 V, V_IL = 0 V
−0.6
5. Number of outputs defined as “n”. Measured with “n−1” outputs switching from HIGH−to−LOW or LOW−to−HIGH. The remaining output is
measured in the LOW state.
CAPACITIVE CHARACTERISTICS
Symbol
Parameter
C_IN
C_OUT
Input Capacitance
Output Capacitance
C_PD Power Dissipation Capacitance
Condition
V_CC = 3.3 V, V_I = 0 V or V_CC
V_CC = 3.3 V, V_I = 0 V or V_CC
10 MHz, V_CC = 3.3 V, V_I = 0 V or V_CC
Typical
7
8
25
Units
pF
pF
pF
ORDERING INFORMATION
Device
Package
Shipping^†
MC74LCXU04DG
SOIC−14
(Pb−Free)
55 Units / Rail
MC74LCXU04DR2G
SOIC−14
(Pb−Free)
2500 Tape & Reel
MC74LCXU04DTG
TSSOP−14
(Pb−Free)
96 Units / Rail
MC74LCXU04DTR2G
TSSOP−14
(Pb−Free)
2500 Tape & Reel
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
http://onsemi.com
4