English
Language : 

MC74LCXU04 Datasheet, PDF (4/8 Pages) ON Semiconductor – Low-Voltage CMOS Unbuffered Hex Inverter With 5 V−Tolerant Inputs
MC74LCXU04
AC CHARACTERISTICS tR = tF = 2.5ns; RL = 500 W (Note 3)
Limits
Symbol
Parameter
Waveform
VCC = 3.3 V ± 0.3 V
CL = 50 pF
Min
Max
TA = −40°C to +85°C
VCC = 2.7 V
CL = 50 pF
Min
Max
VCC = 2.5 V ± 0.2 V
CL = 30 pF
Min
Max
Unit
tPLH
Propagation Delay
tPHL
Input to Output
1
1.0
3.6
1.0
4.5
1.0
4.3
ns
1.0
3.6
1.0
4.5
1.0
4.3
tOSHL
Output−to−Output Skew
1.0
ns
tOSLH
(Note 4)
1.0
3. These AC parameters are preliminary and may be modified.
4. Skew is defined as the absolute value of the difference between the actual propagation delay for any two separate outputs of the same device.
The specification applies to any outputs switching in the same direction, either HIGH−to−LOW (tOSHL) or LOW−to−HIGH (tOSLH); parameter
guaranteed by design.
DYNAMIC SWITCHING CHARACTERISTICS
Symbol
Characteristic
Condition
TA = +25°C
Min Typ Max Unit
VOLP
Dynamic LOW Peak Voltage
VCC = 3.3 V, CL = 50 pF, VIH = 3.3 V, VIL = 0 V
0.8
V
(Note 5)
VCC = 2.5 V, CL = 30 pF, VIH = 2.5 V, VIL = 0 V
0.6
V
VOLV
Dynamic LOW Valley Voltage
VCC = 3.3 V, CL = 50 pF, VIH = 3.3 V, VIL = 0 V
−0.8
V
(Note 5)
VCC = 2.5 V, CL = 30 pF, VIH = 2.5 V, VIL = 0 V
−0.6
V
5. Number of outputs defined as “n”. Measured with “n−1” outputs switching from HIGH−to−LOW or LOW−to−HIGH. The remaining output is
measured in the LOW state.
CAPACITIVE CHARACTERISTICS
Symbol
Parameter
Condition
Typical
Unit
CIN
Input Capacitance
VCC = 3.3 V, VI = 0 V or VCC
7
pF
COUT
Output Capacitance
VCC = 3.3 V, VI = 0 V or VCC
8
pF
CPD
Power Dissipation Capacitance
10 MHz, VCC = 3.3 V, VI = 0 V or VCC
25
pF
ORDERING INFORMATION
Device
Package
Shipping†
MC74LCXU04D
SOIC−14
55 Units / Rail
MC74LCXU04DG
SOIC−14
(Pb−Free)
55 Units / Rail
MC74LCXU04DR2
SOIC−14
2500 Tape & Reel
MC74LCXU04DR2G
SOIC−14
(Pb−Free)
2500 Tape & Reel
MC74LCXU04DT
TSSOP−14*
96 Units / Rail
MC74LCXU04DTR2
TSSOP−14*
2500 Tape & Reel
MC74LCXU04M
SOEIAJ−14
50 Units / Rail
MC74LCXU04MEL
SOEIAJ−14
2000 Tape & Reel
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
*This package is inherently Pb−Free.
http://onsemi.com
4