|
MC74LCX32_05 Datasheet, PDF (4/8 Pages) ON Semiconductor – Low-Voltage CMOS Quad 2-Input OR Gate With 5 V−Tolerant Inputs | |||
|
◁ |
MC74LCX32
AC CHARACTERISTICS tR = tF = 2.5 ns; RL = 500 W
Limits
Symbol
Parameter
Waveform
VCC = 3.3 V ± 0.3 V
CL = 50 pF
Min
Max
TA = â40°C to +85°C
VCC = 2.7 V
CL = 50 pF
Min
Max
VCC = 2.5 V ± 0.2 V
CL = 30 pF
Min
Max
Unit
tPLH
Propagation Delay Time
1
1.5
5.5
1.5
6.2
1.5
6.6
ns
tPHL
Input to Output
1.5
5.5
1.5
6.2
1.5
6.6
tOSHL
OutputâtoâOutput Skew
1.0
ns
tOSLH
(Note 2)
1.0
2. Skew is defined as the absolute value of the difference between the actual propagation delay for any two separate outputs of the same device.
The specification applies to any outputs switching in the same direction, either HIGHâtoâLOW (tOSHL) or LOWâtoâHIGH (tOSLH); parameter
guaranteed by design.
DYNAMIC SWITCHING CHARACTERISTICS
Symbol
Characteristic
Condition
TA = +25°C
Min
Typ
Max Unit
VOLP
Dynamic LOW Peak Voltage
VCC = 3.3 V, CL = 50 pF, VIH = 3.3 V, VIL = 0 V
0.8
V
(Note 3)
VCC = 2.5 V, CL = 30 pF, VIH = 2.5 V, VIL = 0 V
0.6
V
VOLV
Dynamic LOW Valley Voltage
VCC = 3.3 V, CL = 50 pF, VIH = 3.3 V, VIL = 0 V
â0.8
V
(Note 3)
VCC = 2.5 V, CL = 30 pF, VIH = 2.5 V, VIL = 0 V
â0.6
V
3. Number of outputs defined as ânâ. Measured with ânâ1â outputs switching from HIGHâtoâLOW or LOWâtoâHIGH. The remaining output is
measured in the LOW state.
CAPACITIVE CHARACTERISTICS
Symbol
Parameter
CIN
COUT
CPD
Input Capacitance
Output Capacitance
Power Dissipation Capacitance
Condition
VCC = 3.3 V, VI = 0 V or VCC
VCC = 3.3 V, VI = 0 V or VCC
10 MHz, VCC = 3.3 V, VI = 0 V or VCC
Typical
Unit
7
pF
8
pF
25
pF
ORDERING INFORMATION
Device
Package
Shippingâ
MC74LCX32D
SOICâ14
55 Units / Rail
MC74LCX32DR2
SOICâ14
2500 Tape & Reel
MC74LCX32DR2G
SOICâ14
(PbâFree)
2500 Tape & Reel
MC74LCX32DT
TSSOPâ14*
96 Units / Rail
MC74LCX32DTG
TSSOPâ14*
96 Units / Rail
MC74LCX32DTR2
TSSOPâ14*
2500 Tape & Reel
MC74LCX32DTR2G
TSSOPâ14*
2500 Tape & Reel
MC74LCX32MEL
SOEIAJâ14
2000 Tape & Reel
MC74LCX32MELG
SOEIAJâ14
(PbâFree)
2000 Tape & Reel
â For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
*This package is inherently PbâFree.
http://onsemi.com
4
|
▷ |