|
MC74HC4053DT Datasheet, PDF (4/16 Pages) ON Semiconductor – Analog Multiplexers/ Demultiplexers | |||
|
◁ |
MC54/74HC4051 MC74HC4052 MC54/74HC4053
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ MAXIMUM RATINGS*
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ Symbol
Parameter
Value
Unit
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ VCC Positive DC Supply Voltage (Referenced to GND) â 0.5 to + 7.0
V
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ (Referenced to VEE) â 0.5 to + 14.0
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ VEE Negative DC Supply Voltage (Referenced to GND)
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ VIS Analog Input Voltage
â 7.0 to + 5.0
V
VEE â 0.5 to
V
VCC + 0.5
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ Vin Digital Input Voltage (Referenced to GND)
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ I
DC Current, Into or Out of Any Pin
â 0.5 to VCC + 0.5 V
± 25
mA
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ PD Power Dissipation in Still Air,Plastic or Ceramic DIPâ
750
mW
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ SOIC Packageâ
500
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ TSSOP Packageâ
450
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ Tstg Storage Temperature Range
â 65 to + 150
_C
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ TL Lead Temperature, 1 mm from Case for 10 Seconds
_C
Plastic DIP, SOIC or TSSOP Package
260
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ Ceramic DIP
300
* Maximum Ratings are those values beyond which damage to the device may occur.
Functional operation should be restricted to the Recommended Operating Conditions.
â Derating â Plastic DIP: â 10 mW/_C from 65_ to 125_C
Ceramic DIP: â 10 mW/_C from 100_ to 125_C
SOIC Package: â 7 mW/_C from 65_ to 125_C
TSSOP Package: â 6.1 mW/_C from 65_ to 125_C
RECOMMENDED OPERATING CONDITIONS
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ Symbol
Parameter
Min Max Unit
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ VCC Positive DC Supply Voltage
(Referenced to GND) 2.0 6.0 V
(Referenced to VEE) 2.0 12.0
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ VEE Negative DC Supply Voltage, Output (Referenced to
GND)
â 6.0 GND V
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ VIS
Analog Input Voltage
VEE VCC
V
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ Vin
Digital Input Voltage (Referenced to GND)
GND VCC V
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ VIO* Static or Dynamic Voltage Across Switch
1.2 V
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ TA
Operating Temperature Range, All Package Types
â 55 + 125 _C
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ tr, tf
Input Rise/Fall Time
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ (Channel Select or Enable Inputs)
VCC = 2.0 V 0
VCC = 4.5 V 0
VCC = 6.0 V 0
1000 ns
500
400
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ * For voltage drops across switch greater than 1.2V (switch on), excessive VCC current may be
drawn; i.e., the current out of the switch may contain both VCC and switch input components. The
reliability of the device will be unaffected unless the Maximum Ratings are exceeded.
This device contains protection
circuitry to guard against damage
due to high static voltages or electric
fields. However, precautions must
be taken to avoid applications of any
voltage higher than maximum rated
voltages to this highâimpedance cir-
cuit. For proper operation, Vin and
Vout should be constrained to the
range GND v (Vin or Vout) v VCC.
Unused inputs must always be
tied to an appropriate logic voltage
level (e.g., either GND or VCC).
Unused outputs must be left open.
|
▷ |