MC10EP11_06 Datasheet, PDF (4/11 Pages) ON Semiconductor – 3.3V / 5V ECL 1:2 Differential Fanout Buffer

MC10EP11, MC100EP11
Table 5. 10EP DC CHARACTERISTICS, PECL V_CC = 5.0 V, V_EE = 0 V (Note 5)
−40°C
25°C
85°C
Symbol
Characteristic
Min Typ Max Min Typ Max Min Typ Max _Unit
I_EE
Negative Power Supply Current
20
29
37
20
30
39
22
31
40 mA
V_OH
Output HIGH Voltage (Note 6)
3865 3990 4115 3930 4055 4180 3990 4115 4240 mV
V_OL
Output LOW Voltage (Note 6)
3065 3190 3315 3130 3255 3380 3190 3315 3440 mV
V_IH
Input HIGH Voltage (Single−Ended)
3790
4115 3855
4180 3915
4240 mV
V_IL
Input LOW Voltage (Single−Ended)
3065
3390 3130
3455 3190
3515 mV
V_IHCMR Input HIGH Voltage Common Mode
2.0
Range (Differential Configuration) (Note 7)
5.0 2.0
5.0 2.0
5.0 V
I_IH
Input HIGH Current
I_IL
Input LOW Current
D 0.5
D −150
150
0.5
−150
150
0.5
−150
150 mA
mA
NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit
board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared
operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit
values are applied individually under normal operating conditions and not valid simultaneously.
5. Input and output parameters vary 1:1 with V_CC.
6. All loading with 50 W to V_CC − 2.0 V.
7. V_IHCMR min varies 1:1 with V_EE, V_IHCMR max varies 1:1 with V_CC. The V_IHCMR range is referenced to the most positive side of the differential
input signal.
Table 6. 10EP DC CHARACTERISTICS, NECL V_CC = 0 V; V_EE = −5.5 V to −3.0 V (Note 8)
−40°C
25°C
85°C
Symbol
Characteristic
Min Typ Max Min Typ Max Min Typ Max _Unit
I_EE
V_OH
V_OL
V_IH
V_IL
V_IHCMR
Negative Power Supply Current
Output HIGH Voltage (Note 9)
Output LOW Voltage (Note 9)
Input HIGH Voltage (Single−Ended)
Input LOW Voltage (Single−Ended)
Input HIGH Voltage Common Mode
Range (Differential Configuration)
(Note 10)
20
29
37
20
30
39
22
31
40 mA
−1135 −1010 −885 −1070 −945 −820 −1010 −885 −760 mV
−1935 −1810 −1685 −1870 −1745 −1620 −1810 −1685 −1560 mV
−1210
−885 −1145
−820 −1085
−760 mV
−1935
−1610 −1870
−1545 −1810
−1485 mV
V_EE + 2.0
0.0
V_EE + 2.0
0.0
V_EE + 2.0
0.0 V
I_IH
Input HIGH Current
I_IL
Input LOW Current
D 0.5
D −150
150
0.5
−150
150
0.5
−150
150 mA
mA
NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit
board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared
operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit
values are applied individually under normal operating conditions and not valid simultaneously.
8. Input and output parameters vary 1:1 with V_CC.
9. All loading with 50 W to V_CC − 2.0 V.
10. V_IHCMR min varies 1:1 with V_EE, V_IHCMR max varies 1:1 with V_CC. The V_IHCMR range is referenced to the most positive side of the differential
input signal.
http://onsemi.com
4