MC100LVEL32_16 Datasheet, PDF (4/8 Pages) ON Semiconductor – 3.3 V ECL /2 Divider

MC100LVEL32
Table 5. AC CHARACTERISTICS (V_CC = 3.3 V; V_EE = 0.0 V or V_CC = 0.0 V; V_EE = −3.3 V (Note 1))
−40°C
25°C
85°C
Symbol
Characteristic
Min Typ Max Min Typ Max Min Typ Max Unit
f_max Maximum Toggle Frequency
2.2 2.5
2.4 2.6
2.6 2.8
GHz
t_PLH Propagation Delay CLK to Q (Differential) 350 500 530 370 510 550 410 540 590 ps
t_PHL
CLK to Q (Single-Ended)
300 500 580 320 510 600 360 540 640
Reset to Q
440 555 640 450 540 650 480 580 680
t_RR Reset Recovery
175 50
175 50
175 50
ps
t_PW Minimum Pulse Width Reset
500 300
500 300
500 300
ps
t_JITTER Random Clock Jitter (RMS)
2.0
2.0
2.0
ps
V_PP Input Swing (Differential Swing) (Note 2) 150
1000 150
1000 150
1000 mV
t_r
Output Rise / Fall Times Q (20%−80%)
120 225 320 120 225 320 120 225 320 ps
t_f
NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit
board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared
operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit
values are applied individually under normal operating conditions and not valid simultaneously.
1. V_EE can vary ±0.3 V.
2. V_PP(min) is input swing measured single-ended on each input in differential configuration.
CLK
RESET
Q
Figure 1. Timing Diagram
www.onsemi.com
4