|
MC100LVEL16_15 Datasheet, PDF (4/9 Pages) ON Semiconductor – 3.3V ECL Differential Receiver | |||
|
◁ |
MC100LVEL16
Table 4. LVPECL DC CHARACTERISTICS VCC = 3.3 V; VEE = 0.0 V (Note 3)
â40°C
25°C
85°C
Symbol
Characteristic
IEE
Power Supply Current
VOH
Output HIGH Voltage (Note 4)
VOL
Output LOW Voltage (Note 4)
VIH
Input HIGH Voltage (SingleâEnded)
VIL
Input LOW Voltage (SingleâEnded)
VBB
Output Voltage Reference
VIHCMR
Input HIGH Voltage Common Mode
Range (Differential) (Note 5)
Vpp < 500 mV
Vpp y 500 mV
Min
2215
1470
2135
1490
1.92
1.2
1.5
Typ
17
2295
1605
Max
23
2420
1745
2420
1825
2.04
2.9
2.9
Min
2275
1490
2135
1490
1.92
1.1
1.4
Typ
17
2345
1595
Max
23
2420
1680
2420
1825
2.04
2.9
2.9
Min
2275
1490
2135
1490
1.92
1.1
1.4
Typ
18
2345
1595
Max Unit
24 mA
2420 mV
1680 mV
2420 mV
1825 mV
2.04 V
2.9 V
2.9 V
IIH
Input HIGH Current
150
150
150 mA
IIL
Input LOW Current
D 0.5
0.5
0.5
mA
D â600
â600
â600
mA
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
3. Input and output parameters vary 1:1 with VCC. VEE can vary ±0.3 V.
4. Outputs are terminated through a 50 W resistor to VCC â 2 V.
5. VIHCMR min varies 1:1 with VEE, max varies 1:1 with VCC. The VIHCMR range is referenced to the most positive side of the differential input signal.
Normal operation is obtained if the HIGH level falls within the specified range and the peak-to-peak voltage lies between VPPmin and 1 V.
Table 5. LVNECL DC CHARACTERISTICS VCC = 0.0 V; VEE = â3.3 V (Note 6)
â40°C
25°C
85°C
Symbol
Characteristic
Min Typ Max Min Typ Max Min Typ Max Unit
IEE
Power Supply Current
17
23
17
23
18
24 mA
VOH
Output HIGH Voltage (Note 7)
â1085 â1005 â880 â1025 â955 â880 â1025 â955 â880 mV
VOL
Output LOW Voltage (Note 7)
â1830 â1695 â1555 â1810 â1705 â1620 â1810 â1705 â1620 mV
VIH
Input HIGH Voltage (SingleâEnded) â1165
â880 â1165
â880 â1165
â880 mV
VIL
Input LOW Voltage (SingleâEnded) â1810
â1475 â1810
â1475 â1810
â1475 mV
VBB
Output Voltage Reference
â1.38
â1.26 â1.38
â1.26 â1.38
â1.26 V
VIHCMR
Input HIGH Voltage Common Mode
Range (Differential) (Note 8)
Vpp < 500 mV
Vpp y 500 mV
â2.1
â1.8
â0.4 â2.2
â0.4 â1.9
â0.4 â2.2
â0.4 â1.9
â0.4 V
â0.4 V
IIH
Input HIGH Current
150
150
150 mA
IIL
Input LOW Current
D 0.5
0.5
0.5
mA
D â600
â600
â600
mA
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
6. Input and output parameters vary 1:1 with VCC. VEE can vary ±0.3 V.
7. Outputs are terminated through a 50 W resistor to VCC â 2 V.
8. VIHCMR min varies 1:1 with VEE, max varies 1:1 with VCC. The VIHCMR range is referenced to the most positive side of the differential input signal.
Normal operation is obtained if the HIGH level falls within the specified range and the peak-to-peak voltage lies between VPPmin and 1 V.
www.onsemi.com
4
|
▷ |