CS4122_05 Datasheet, PDF (4/9 Pages) ON Semiconductor – Triple Air−Core Gauge Driver with Serial Input Bus

CS4122
PIN FUNCTION DESCRIPTION
PIN #
PIN SYMBOL
FUNCTION
1
SCLK
Serial clock for shifting in/out of data. Rising edge shifts data on SI into the shift register and the
falling edge changes the data on SO.
2
CS
When High, allows data at SI to be shifted into the internal shift register with the rising edge of
SCLK. The falling edge transfers the shift register contents into the DAC and multiplexer to update
the output buffers. The falling edge also re−enables the output drivers if they have been disabled by
a fault.
3
SIN−
Negative output for SINE coil.
4
SIN+
Positive output for SINE coil.
5, 6, 7, 8,
17, 18, 19, 20
GND
Ground for V_BB and V_CC supplies; device substrate. In the power SOIC package they aid in removing
internally generated heat from the package and as such should be soldered to as large a PCB area
as possible.
9
V_BB/2
1/2 V_BB output for biasing the minor coils.
10
C1+
Positive output for the #1 minor coil.
11
C1−
Negative output for the #1 minor coil.
12
V_CC
5.0 V logic supply. The internal registers and latches are reset by a POR generated by the rising
edge of the voltage on this lead.
13
FAULT
Open−drain fault flag. A logic low on this lead indicates that an output is shorted or the device is in
thermal shutdown.
14
V_BB
Analog supply. Nominally 12 V.
15
C2+
Positive output for the #2 minor coil.
16
C2−
Negative output for the #2 minor coil.
21
COS−
Negative output for COSINE coil.
22
COS+
Positive output for COSINE coil.
23
SI
Serial data input. Data present at the rising edge of the clock signal is shifted into the internal shift
register.
24
SO
Serial data output. Existing 12 bit data is shifted out when new data is shifted in. Allows cascading
of multiple devices on common serial port.
ORDERING INFORMATION
Device
Package
Shipping^†
CS4122XDWF24
SOIC−24 WB
31 Units / Rail
CS4122XDWF24G
SOIC−24 WB
(Pb−Free)
31 Units / Rail
CS4122XDWFR24
SOIC−24 WB
1000 Tape & Reel
CS4122XDWFR24G
SOIC−24 WB
(Pb−Free)
1000 Tape & Reel
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
http://onsemi.com
4