CM1213A_11 Datasheet, PDF (4/13 Pages) ON Semiconductor – 1, 2 and 4-Channel Low Capacitance ESD Protection Arrays

CM1213A
SPECIFICATIONS
Table 2. ABSOLUTE MAXIMUM RATINGS
Parameter
Rating
Units
Operating Supply Voltage (V_P − V_N)
Operating Temperature Range
6.0
V
–40 to +85
°C
Storage Temperature Range
–65 to +150
°C
DC Voltage at any channel input
(V_N − 0.5) to (V_P + 0.5)
V
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
Table 3. STANDARD OPERATING CONDITIONS
Parameter
Operating Temperature Range
Package Power Rating
SOT23−3, SOT143−4, SOT23−5, SOT23−6, and SC70−6 Packages
MSOP−10 Package
Rating
–40 to +85
225
400
Units
°C
mW
Table 4. ELECTRICAL OPERATING CHARACTERISTICS (Note1)
Symbol
Parameter
Conditions
V_P
Operating Supply Voltage (V_P−V_N)
I_P
Operating Supply Current
V_F
Diode Forward Voltage
Top Diode
Bottom Diode
(V_P−V_N) = 3.3 V
I_F = 8 mA; T_A = 25°C
I_LEAK
C_IN
Channel Leakage Current
Channel Input Capacitance
T_A = 25°C; V_P = 5 V, V_N = 0 V
At 1 MHz, V_P = 3.3 V, V_N = 0 V, V_IN = 1.65 V
(Note 2)
DC_IN
Channel Input Capacitance Matching
At 1 MHz, V_P = 3.3 V, V_N = 0 V, V_IN = 1.65 V
(Note 2)
V_ESD
V_CL
ESD Protection − Peak Discharge
Voltage at any channel input, in system
Contact discharge per
IEC 61000−4−2 standard
Channel Clamp Voltage
Positive Transients
Negative Transients
T_A = 25°C (Notes 2, 3, and 4)
T_A = 25°C, I_PP = 1A,
t_P = 8/20 mS
(Notes 2 and 4)
R_DYN
Dynamic Resistance
Positive Transients
Negative Transients
I_PP = 1A, t_P = 8/20 mS
Any I/O pin to Ground
(Notes 2 and 4)
1. All parameters specified at T_A = –40°C to +85°C unless otherwise noted.
2. Standard IEC 61000−4−2 with C_Discharge = 150 pF, R_Discharge = 330 W, V_P = 3.3 V, V_N grounded.
3. These measurements performed with no external capacitor on V_P (V_P floating).
Min Typ Max Units
3.3 5.5
V
8.0 mA
V
0.60 0.80 0.95
0.60 0.80 0.95
0.1 1.0 mA
0.85 1.2 pF
0.02
pF
kV
8
V
+10
–1.7
W
0.9
0.5
http://onsemi.com
4