English
Language : 

74FST3400 Datasheet, PDF (4/8 Pages) ON Semiconductor – 4-Bit, 4-Port Bus Exchange Switch
74FST3400
DC ELECTRICAL CHARACTERISTICS
Symbol
Parameter
Conditions
VCC
TA = *405C to )855C
(V)
Min Typ* Max Unit
VIK Clamp Diode Resistance
IIN = *18mA
4.5
*1.2 V
VIH High−Level Input Voltage
4.0 to 5.5 2.0
V
VIL Low−Level Input Voltage
4.0 to 5.5
0.8
V
II
Input Leakage Current
0 v VIN v 5.5 V
IOZ OFF−STATE Leakage Current 0 v A, B v VCC
RON Switch On Resistance (Note 6) VIN = 0 V, IIN = 64 mA
5.5
$1.0 mA
5.5
$1.0 mA
4.5
4
7
W
VIN = 0 V, IIN = 30 mA
4.5
4
7
VIN = 2.4 V, IIN = 15 mA
4.5
8
15
VIN = 2.4 V, IIN = 15 mA
4.0
11
20
ICC Quiescent Supply Current
VIN = VCC or GND, IOUT = 0
5.5
3
mA
DICC Increase In ICC per Input
One input at 3.4 V, Other inputs at VCC or GND
5.5
2.5 mA
*Typical values are at VCC = 5.0 V and TA = 25°C.
6. Measured by the voltage drop between A and B pins at the indicated current through the switch. On resistance is determined by the lower
of the voltages on the two (A or B) pins.
AC ELECTRICAL CHARACTERISTICS
TA = *405C to )855C
CL = 50 pF, RU = RD = 500 W
Symbol
Parameter
Conditions
VCC = 4.5−5.5 V
Min
Max
VCC = 4.0 V
Min
Max Unit
tPHL,
tPLH
Prop Delay Bus to Bus (Note 7)
Prop Delay, BXn to An, Bn, Cn or Dn
VI = OPEN
0.25
1.0
5.3
0.25 ns
6.0
tPZH,
tPZL
Output Enable Time, BXn to An, Bn, Cn or Dn
Output Enable Time, IOE to An, Bn, Cn or Dn
VI = 7 V for tPZL
VI = OPEN for tPZH
1.0
5.8
1.0
5.8
6.5
ns
6.5
tPHZ,
tPLZ
Output Disable Time, BXn to An, Bn, Cn or Dn
Output Disable Time, IOE to An, Bn, Cn or Dn
VI = 7 V for tPLZ
VI = OPEN for tPHZ
1.0
5.3
1.0
5.3
6.2
ns
6.2
7. This parameter is guaranteed by design but is not tested. The bus switch contributes no propagation delay other than the RC delay of the
typical On resistance of the switch and the 50 pF load capacitance, when driven by an ideal voltage source (zero output impedance).
CAPACITANCE (Note 8)
Symbol
Parameter
Conditions
CIN Control Pin Input Capacitance
VCC = 5.0 V
CI/O Port Input/Output Capacitance
VCC, OE = 5.0 V
8. TA = )25°C, f = 1 MHz, Capacitance is characterized but not tested.
Typ
Max
Unit
6
pF
13
pF
http://onsemi.com
4