NS5S1153_16 Datasheet, PDF (3/9 Pages) ON Semiconductor – USB 2.0 High Speed and Audio Switch with Negative Swing Capability

NS5S1153
OPERATING CONDITIONS
MAXIMUM RATINGS
Symbol
Pins
Parameter
Value
Unit
V_CC
V_BUS
V_IS
V_CC
V_{BUS_CTRL}
D+ to COM+
D− to COM−
Positive DC Supply Voltage
V_BUS Control Input Voltage
Analog Signal Voltage
−0.5 to +6.0
V
−0.5 to +6.0
V
−0.5 to +6.0
V
R to COM+
L to COM−
−2.5 to V_CC + 0.5
V_IS
V_IN
I_CC
T_S
I_{IS_CON}
COM+, COM−
ASel
V_CC
COM+, COM−
R, L, D+, D−
DC Signal Voltage Tolerance (<24 hours)
Control Input Override Voltage
Positive DC Supply Current
Storage Temperature
Analog Signal Continuous Current−Closed Switch
5.25
V
−0.5 to +6.0
V
50
mA
−65 to +150
°C
$100
mA
I_{IS_PK}
COM+, COM−
R, L, D+, D−
Analog Signal Continuous Current 10% Duty Cycle
$500
mA
I_IN
ASel
Control Input Override Current
1
mA
V_{BUS_CTRL}
VBUS Control Input Current
1
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
RECOMMENDED OPERATING CONDITIONS
Symbol
Pins
Parameter
Min
Max
Unit
V_CC
V_BUS
V_IS
V_CC
V_{BUS_CTRL}
D+ to COM+
D− to COM−
Positive DC Supply Voltage
V_BUS Control Input Voltage
Analog Signal Voltage (Note 1)
2.7
GND
GND
5.0
V
5.25
V
V_CC
V
R to COM+
L to COM−
−2.0
V_CC
V_IN
ASel
Control Input Override Voltage
GND
V_CC
V
T_A
Operating Temperature
−40
+85
°C
Functional operation above the stresses listed in the Recommended Operating Ranges is not implied. Extended exposure to stresses beyond
the Recommended Operating Ranges limits may affect device reliability.
1. In USB mode, any signal applied to the off−state audio inputs R, L may not swing below ground or above 1.5 V.
www.onsemi.com
3