NOA3302 Datasheet, PDF (3/23 Pages) ON Semiconductor – Digital Proximity Sensor

NOA3302
Table 2. ABSOLUTE MAXIMUM RATINGS
Rating
Symbol
Value
Unit
Input power supply
VDD
4.0
V
Input voltage range
Output voltage range
Maximum Junction Temperature
Storage Temperature
ESD Capability, Human Body Model (Note 1)
ESD Capability, Charged Device Model (Note 1)
ESD Capability, Machine Model (Note 1)
Moisture Sensitivity Level
V_in
−0.3 to VDD + 0.2
V
V_out
−0.3 to VDD + 0.2
V
T_J(max)
100
°C
T_STG
−40 to 80
°C
ESD_HBM
2
kV
ESD_CDM
500
V
ESD_MM
200
V
MSL
3
−
Lead Temperature Soldering (Note 2)
T_SLD
260
°C
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
1. This device incorporates ESD protection and is tested by the following methods:
ESD Human Body Model tested per EIA/JESD22−A114
ESD Charged Device Model tested per ESD−STM5.3.1−1999
ESD Machine Model tested per EIA/JESD22−A115
Latchup Current Maximum Rating: ≤ 100 mA per JEDEC standard: JESD78
2. For information, please refer to our Soldering and Mounting Techniques Reference Manual, SOLDERRM/D
Table 3. OPERATING RANGES
Rating
Symbol
Min
Typ
Max
Unit
Power supply voltage
VDD
2.3
3.6
V
Power supply current, stand−by mode (VDD = 3.0 V)
Power supply current, stand−by mode (VDD = 3.6 V)
Power supply average current, ALS operating 100 ms
integration time and 500 ms intervals
IDD_{STBY_3.0}
IDD_{STBY_3.6}
IDD_ALS
5
mA
10
mA
50
mA
Power supply average current, PS operating 300 ms
integration time and 100 ms intervals
IDD_PS
100
mA
LED average sink current, PS operating at 300 ms integration
I_LED
time and 100 ms intervals and LED current set at 50 mA
75
mA
I²C signal voltage (Note 3)
VDD_I2C
1.6
1.8
2.0
V
Low level input voltage (VDD_I2C related input levels)
High level input voltage (VDD_I2C related input levels)
Hysteresis of Schmitt trigger inputs
Low level output voltage (open drain) at 3 mA sink current
(INTB)
V_IL
V_IH
V_hys
V_OL
−0.3
0.7 VDD_I2C
0.1 VDD_I2C
0.3 VDD_I2C
V
VDD_I2C + 0.2
V
V
0.2 VDD_I2C
V
Input current of IO pin with an input voltage between 0.1 VDD
I_I
−10
and 0.9 VDD
10
mA
Output low current (INTB)
I_OL
3
−
mA
Operating free−air temperature range
T_A
−40
80
°C
3. The I²C interface is functional to 3.0 V, but timing is only guaranteed up to 2.0 V. High Speed mode is guaranteed to be functional to 2.0 V.
http://onsemi.com
3