NCV898031 Datasheet, PDF (3/13 Pages) ON Semiconductor – 2 MHz Non-Synchronous SEPIC/Boost Controller

NCV898031
ABSOLUTE MAXIMUM RATINGS (Voltages are with respect to GND, unless otherwise indicated)
Rating
Value
Unit
Dc Supply Voltage (VIN)
−0.3 to 40
V
Peak Transient Voltage (Load Dump on VIN)
45
V
Dc Supply Voltage (VDRV, GDRV)
12
V
Peak Transient Voltage (VFB)
−0.3 to 6
V
Dc Voltage (VC, VFB, ISNS)
−0.3 to 3.6
V
Dc Voltage (EN)
−0.3 to 6
V
Dc Voltage Stress (VIN − VDRV)*
−0.7 to 40
V
Operating Junction Temperature
−40 to 150
°C
Storage Temperature Range
−65 to 150
°C
Peak Reflow Soldering Temperature: Pb−Free, 60 to 150 seconds at 217°C
265 peak
°C
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
*An external diode from the input to the VIN pin is required if bootstrapping VDRV and VIN off of the output voltage.
PACKAGE CAPABILITIES
Characteristic
ESD Capability (All Pins)
Human Body Model
Machine Model
Moisture Sensitivity Level
Package Thermal Resistance
Junction−to−Ambient, R_qJA (Note 1)
1. Value based on copper are of 650 mm² (or 1 in²) of 1 oz copper thickness and FR4 PCB substrate.
Value
w2.0
w200
1
100
Unit
KV
V
°C/W
http://onsemi.com
3