NCV8501_09 Datasheet, PDF (3/16 Pages) ON Semiconductor – Micropower 150 mA LDO Linear Regulators

NCV8501 Series
MAXIMUM RATINGS*
Rating
Value
Unit
V_IN (dc)
Peak Transient Voltage (46 V Load Dump @ V_IN = 14 V)
Operating Voltage
−15 to 45
V
60
V
45
V
V_OUT (dc)
Voltage Range (RESET, FLAG)
−0.3 to 16
V
−0.3 to 10
V
Input Voltage Range (MON)
Input Voltage Range (VAOJ)
−0.3 to 10
V
−0.3 to 16
Input Voltage Range (ENABLE)
−0.3 to 10**
V
ESD Susceptibility (Human Body Model)
2.0
kV
Junction Temperature, T_J
−40 to +150
°C
Storage Temperature, T_S
−55 to 150
°C
Package Thermal Resistance, SO−8:
Junction−to−Case, R_qJC
Junction−to−Ambient, R_qJA
45
°C/W
165
°C/W
Package Thermal Resistance, SOW−16 E PAD:
Junction−to−Case, R_qJC
Junction−to−Ambient, R_qJA
Junction−to−Pin, R_qJP (Note 1)
15
°C/W
56
°C/W
35
°C/W
Lead Temperature Soldering:
Reflow: (SMD styles only) (Note 2)
260 Peak
°C
(Note 3)
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
*During the voltage range which exceeds the maximum tested voltage of V_IN, operation is assured, but not specified. Wider limits may apply.
Thermal dissipation must be observed closely.
**Reference Figure 15 for switched−battery ENABLE application.
1. Measured to pin 16.
2. 150 second maximum above 217°C.
3. −5°C / +0°C allowable conditions.
http://onsemi.com
3