NCP1611_15 Datasheet, PDF (3/29 Pages) ON Semiconductor – Enhanced, High-Efficiency Power Factor Controller

NCP1611
MAXIMUM RATINGS TABLE
Symbol
Pin
Rating
Value
Unit
V_CC
7
V_CONTROL
1
V_sense
2
FFcontrol
3
Power Supply Input
V_CONTROL pin (Note 1)
V_sense pin (Note 5)
FFcontrol pin
−0.3, + 35
V
−0.3, V_CONTROLMAX (*)
V
−0.3, +10
V
−0.3, +10
V
CS/ZCD
4
Input Voltage
Current Injected to pin 4 (Note 4)
−0.3, +35
V
+5
mA
DRV
6
Driver Voltage (Note 1)
Driver Current
−0.3, V_DRV (*)
V
−500, +800
mA
FB
8
Feedback pin
−0.3, +10
V
P_D
R_qJA
Power Dissipation and Thermal Characteristics
Maximum Power Dissipation @ T_A = 70°C
Thermal Resistance Junction to Air
550
mW
145
°C/W
T_J
Operating Junction Temperature Range
−40 to +125
°C
T_Jmax
Maximum Junction Temperature
150
°C
T_Smax
Storage Temperature Range
−65 to 150
°C
T_Lmax
Lead Temperature (Soldering, 10s)
300
°C
ESD_HBM
ESD Capability, HBM model (Note 2)
> 2000
V
ESD_MM
ESD Capability, Machine Model (Note 2)
> 200
V
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
1. “V_CONTROLMAX” is the pin1 clamp voltage and “V_DRV” is the DRV clamp voltage (V_DRVhigh). If V_CC is below V_DRVhigh, “V_DRV” is V_CC.
2. This device(s) contains ESD protection and exceeds the following tests:
Human Body Model 2000 V per JEDEC Standard JESD22−A114E
Machine Model Method 200 V per JEDEC Standard JESD22−A115−A
3. This device contains latch−up protection and exceeds 100 mA per JEDEC Standard JESD78.
4. Maximum CS/ZCD current that can be injected into pin4
VCC
NCP1611
R1
Ipin4
CS/ZCD
Maintain Ipin4
below 5 mA
GND
ESD diode
2k
ESD diode
CS/ZCD
circuitry
7.4V
5. Recommended maximum V_sense voltage for optimal operation is 4.5 V.
www.onsemi.com
3