|
MC74VHCU04_14 Datasheet, PDF (3/6 Pages) ON Semiconductor – Hex Inverter | |||
|
◁ |
MC74VHCU04
DC ELECTRICAL CHARACTERISTICS
Symbol
Parameter
VCC
Test Conditions
V
TA = 25°C
Min
Typ
Max
TA = â40 to 85°C
Min
Max
Unit
VIH
Minimum HighâLevel
Input Voltage
VIL
Maximum LowâLevel
Input Voltage
VOH Minimum HighâLevel
Output Voltage
2.0
1.70
3.0 to 5.5 VCC x 0.8
1.70
V
VCC x 0.8
2.0
3.0 to 5.5
0.30
VCC x 0.2
0.30
V
VCC x 0.2
Vin =VIL
2.0
1.8
2.0
1.8
V
IOH = â50mA
3.0
2.7
3.0
2.7
4.5
4.0
4.5
4.0
Vin = GND
IOH = â4mA
3.0
IOH = â8mA
4.5
VOL
Maximum LowâLevel
Vin = VIH
2.0
Output Voltage
IOL = 50mA
3.0
4.5
2.58
2.48
3.94
3.80
0.0
0.2
0.0
0.3
0.0
0.5
0.2
V
0.3
0.5
Iin
Maximum Input
Leakage Current
Vin = VCC
IOL = 4mA
IOL = 8mA
Vin = 5.5 or GND
3.0
4.5
0 to 5.5
0.36
0.36
± 0.1
0.44
0.44
± 1.0
mA
ICC
Maximum Quiescent
Vin = VCC or GND
5.5
Supply Current
2.0
20.0
mA
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
AC ELECTRICAL CHARACTERISTICS (Input tr = tf = 3.0ns)
Symbol
tPLH,
tPHL
Cin
Parameter
Test Conditions
Maximum Propagation Delay, VCC = 3.3 ± 0.3V
A or B to Y
CL = 15pF
CL = 50pF
VCC = 5.0 ± 0.5V
CL = 15pF
CL = 50pF
Maximum Input Capacitance
TA = 25°C
Min
Typ
Max
5.0
8.9
7.5
11.4
3.5
5.5
5.0
7.0
5
10
TA = â40 to 85°C
Min
Max Unit
1.0
10.5
ns
1.0
13.0
1.0
6.5
1.0
8.0
10
pF
Typical @ 25°C, VCC = 5.0V
CPD Power Dissipation Capacitance (Per Inverter) (Note 1)
9
pF
1. CPD is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption without load.
Average operating current can be obtained by the equation: ICC(OPR) = CPD VCC fin + ICC / 6 (per buffer). CPD is used to determine the
noâload dynamic power consumption; PD = CPD VCC2 fin + ICC VCC.
NOISE CHARACTERISTICS (Input tr = tf = 3.0ns, CL = 50pF, VCC = 5.0V)
Symbol
VOLP
VOLV
VIHD
VILD
Characteristic
Quiet Output Maximum Dynamic VOL
Quiet Output Minimum Dynamic VOL
Minimum High Level Dynamic Input Voltage
Maximum Low Level Dynamic Input Voltage
TA = 25°C
Typ
Max
Unit
0.5
0.8
V
â0.5
â0.8
V
4.0
V
1.0
V
http://onsemi.com
3
|
▷ |