MC74LVXT8051_14 Datasheet, PDF (3/12 Pages) ON Semiconductor – Analog Multiplexer/ Demultiplexer

MC74LVXT8051
RECOMMENDED OPERATING CONDITIONS
Symbol
Parameter
Min
Max
Unit
V_CC Positive DC Supply Voltage
(Referenced to GND)
2.0
6.0
V
V_IS Analog Input Voltage
0.0
V_CC
V
V_in Digital Input Voltage (Referenced to GND)
GND
V_CC
V
V_IO* Static or Dynamic Voltage Across Switch
1.2
V
T_A Operating Temperature Range, All Package Types
–55
+85
_C
t_r, t_f Input Rise/Fall Time (Channel Select or Enable Inputs)
V_CC = 3.3 V ± 0.3 V
0
V_CC = 5.0 V ± 0.5 V
0
100
ns/V
20
Functional operation above the stresses listed in the Recommended Operating Ranges is not implied. Extended exposure to stresses beyond
the Recommended Operating Ranges limits may affect device reliability.
*For voltage drops across switch greater than 1.2 V (switch on), excessive V_CC current may be drawn; i.e., the current out of the switch may
contain both V_CC and switch input components. The reliability of the device will be unaffected unless the Maximum Ratings are exceeded.
DC CHARACTERISTICS − Digital Section (Voltages Referenced to GND)
Symbol
Parameter
V_IH Minimum High−Level Input Voltage,
Channel−Select or Enable Inputs
Condition
R_on = Per Spec
V_IL Maximum Low−Level Input Voltage, R_on = Per Spec
Channel−Select or Enable Inputs
I_in
Maximum Input Leakage Current,
Channel−Select or Enable Inputs
I_CC Maximum Quiescent Supply
Current (per Package)
V_in = V_CC or GND
Channel Select, Enable and
V_IS = V_CC or GND; V_IO = 0 V
Guaranteed Limit
V_CC
V −55 to 25°C ≤85°C ≤125°C Unit
3.0
1.2
4.5
2.0
5.5
2.0
1.2
1.2
V
2.0
2.0
2.0
2.0
3.0
0.53
0.53 0.53
V
4.5
0.8
0.8
0.8
5.5
0.8
0.8
0.8
5.5
±0.1
±1.0 ±1.0
mA
5.5
4
40
160
mA
DC ELECTRICAL CHARACTERISTICS Analog Section
Symbol
Parameter
Test Conditions
V_CC
Guaranteed Limit
V −55 to 25°C v85_C v125_C Unit
R_on Maximum “ON” Resistance
V_in = V_IL or V_IH
3.0
40
V_IS = V_CC to GND
4.5
30
|I_S| v 10.0 mA (Figures 1, 2)
5.5
25
V_in = V_IL or V_IH
3.0
30
V_IS = V_CC or GND (Endpoints) 4.5
25
|I_S| v 10.0 mA (Figures 1, 2)
5.5
20
DR_on
Maximum Difference in “ON”
Resistance Between Any Two
Channels in the Same Package
V_in = V_IL or V_IH
V_IS = 1/2 (V_CC − GND)
|I_S| v 10.0 mA
3.0
15
4.5
8.0
5.5
8.0
I_off Maximum Off−Channel Leakage V_in = V_IL or V_IH;
Current, Any One Channel
V_IO = V_CC or GND;
Switch Off (Figure 3)
5.5
0.1
45
50
W
32
37
28
30
35
40
28
35
25
30
20
25
W
12
15
12
15
0.5
1.0
mA
Maximum Off−Channel
Leakage Current,
Common Channel
V_in = V_IL or V_IH;
V_IO = V_CC or GND;
Switch Off (Figure 4)
5.5
0.2
2.0
4.0
I_on Maximum On−Channel
Leakage Current,
Channel−to−Channel
V_in = V_IL or V_IH;
Switch−to−Switch =
V_CC or GND; (Figure 5)
5.5
0.2
2.0
4.0
mA
http://onsemi.com
3