MC74LCX541_12 Datasheet, PDF (3/8 Pages) ON Semiconductor – Low-Voltage CMOS Octal Buffer Flow Through Pinout

MC74LCX541
MAXIMUM RATINGS
Symbol
Parameter
Value
Condition
Units
V_CC DC Supply Voltage
−0.5 to +7.0
V
V_I
DC Input Voltage
−0.5 ≤ V_I ≤ +7.0
V
V_O DC Output Voltage
−0.5 ≤ V_O ≤ +7.0
Output in 3−State
V
−0.5 ≤ V_O ≤ V_CC + 0.5
(Note 1)
V
I_IK
DC Input Diode Current
−50
V_I < GND
mA
I_OK DC Output Diode Current
−50
V_O < GND
mA
+50
V_O > V_CC
mA
I_O
DC Output Source/Sink Current
±50
mA
I_CC DC Supply Current Per Supply Pin
±100
mA
I_GND DC Ground Current Per Ground Pin
±100
mA
T_STG Storage Temperature Range
−65 to +150
°C
MSL Moisture Sensitivity
Level 1
Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit
values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied,
damage may occur and reliability may be affected.
1. Output in HIGH or LOW State. I_O absolute maximum rating must be observed.
RECOMMENDED OPERATING CONDITIONS
Symbol
Parameter
Min
Typ
Max
Units
V_CC Supply Voltage
Operating
Data Retention Only
V
2.0
3.3
3.6
1.5
3.3
3.6
V_I
Input Voltage
V_O Output Voltage
(HIGH or LOW State)
(3−State)
0
5.5
V
V
0
V_CC
0
5.5
I_OH HIGH Level Output Current, V_CC = 3.0 V − 3.6 V
I_OL LOW Level Output Current, V_CC = 3.0 V − 3.6 V
I_OH HIGH Level Output Current, V_CC = 2.7 V − 3.0 V
I_OL LOW Level Output Current, V_CC = 2.7 V − 3.0 V
T_A
Operating Free−Air Temperature
−40
Dt/DV Input Transition Rise or Fall Rate, V_IN from 0.8 V to 2.0 V, V_CC = 3.0 V
0
−24
mA
24
mA
−12
mA
12
mA
+85
°C
10
ns/V
ORDERING INFORMATION
Device
Package
Shipping^†
MC74LCX541DWR2G
NLV74LCX541DWR2G*
SOIC−20
(Pb−Free)
1000 Tape & Reel
1000 Tape & Reel
MC74LCX541DWG
NLV74LCX541DWG*
SOIC−20
(Pb−Free)
38 Units / Rail
38 Units / Rail
MC74LCX541DTG
NLV74LCX541DTG*
TSSOP−20
(Pb−Free)
75 Units / Rail
75 Units / Rail
MC74LCX541DTR2G
NLV74LCX541DTR2G*
TSSOP−20
(Pb−Free)
2500 Tape & Reel
2500 Tape & Reel
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
*NLV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q100 Qualified and PPAP
Capable.
http://onsemi.com
3