MC74LCX374_14 Datasheet, PDF (3/9 Pages) ON Semiconductor – Low-Voltage CMOS Octal D-Type Flip-Flop

MC74LCX374
MAXIMUM RATINGS
Symbol
Parameter
Value
Condition
Units
V_CC DC Supply Voltage
V_I
DC Input Voltage
V_O DC Output Voltage
I_IK
DC Input Diode Current
I_OK DC Output Diode Current
I_O
I_CC
I_GND
T_STG
MSL
DC Output Source/Sink Current
DC Supply Current Per Supply Pin
DC Ground Current Per Ground Pin
Storage Temperature Range
Moisture Sensitivity
−0.5 to +7.0
−0.5 ≤ V_I ≤ +7.0
−0.5 ≤ V_O ≤ +7.0
−0.5 ≤ V_O ≤ V_CC + 0.5
−50
−50
+50
±50
±100
±100
−65 to +150
V
V
Output in 3−State
V
(Note 1)
V
V_I < GND
mA
V_O < GND
mA
V_O > V_CC
mA
mA
mA
mA
°C
Level 1
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
1. Output in HIGH or LOW State. I_O absolute maximum rating must be observed.
RECOMMENDED OPERATING CONDITIONS
Symbol
Parameter
Min
Typ
Max
Units
V_CC Supply Voltage
Operating
Data Retention Only
V
2.0
3.3
3.6
1.5
3.3
3.6
V_I
Input Voltage
V_O Output Voltage
(HIGH or LOW State)
(3−State)
0
5.5
V
V
0
V_CC
0
5.5
I_OH HIGH Level Output Current, V_CC = 3.0 V − 3.6 V
−24
mA
I_OL LOW Level Output Current, V_CC = 3.0 V − 3.6 V
24
mA
I_OH HIGH Level Output Current, V_CC = 2.7 V − 3.0 V
−12
mA
I_OL LOW Level Output Current, V_CC = 2.7 V − 3.0 V
12
mA
T_A
Operating Free−Air Temperature
−40
+85
°C
Dt/DV Input Transition Rise or Fall Rate, V_IN from 0.8 V to 2.0 V, V_CC = 3.0 V
0
10
ns/V
Functional operation above the stresses listed in the Recommended Operating Ranges is not implied. Extended exposure to stresses beyond
the Recommended Operating Ranges limits may affect device reliability.
ORDERING INFORMATION
Device
Package
Shipping^†
MC74LCX374DWR2G
SOIC−20 WB
(Pb−Free)
1000 / Tape & Reel
MC74LCX374DTR2G
TSSOP−20
(Pb−Free)
2500 / Tape & Reel
NLV74LCX374DTR2G*
TSSOP−20
(Pb−Free)
2500 / Tape & Reel
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
*NLV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q100 Qualified and PPAP
Capable.
http://onsemi.com
3