MC74LCX374_05 Datasheet, PDF (3/8 Pages) ON Semiconductor – Low-Voltage CMOS Octal D-Type Flip-Flop With 5 V−Tolerant Inputs and Outputs (3−State, Non−Inverting)

MC74LCX374
MAXIMUM RATINGS
Symbol
Parameter
Value
Condition
Unit
V_CC
DC Supply Voltage
−0.5 to +7.0
V
V_I
DC Input Voltage
−0.5 ≤ V_I ≤ +7.0
V
V_O
DC Output Voltage
−0.5 ≤ V_O ≤ +7.0
Output in 3−State
V
−0.5 ≤ V_O ≤ V_CC + 0.5
Note 1
V
I_IK
DC Input Diode Current
−50
V_I < GND
mA
I_OK
DC Output Diode Current
−50
V_O < GND
mA
+50
V_O > V_CC
mA
I_O
DC Output Source/Sink Current
±50
mA
I_CC
DC Supply Current Per Supply Pin
±100
mA
I_GND
DC Ground Current Per Ground Pin
±100
mA
T_STG
Storage Temperature Range
−65 to +150
°C
Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit
values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied,
damage may occur and reliability may be affected.
1. Output in HIGH or LOW State. I_O absolute maximum rating must be observed.
RECOMMENDED OPERATING CONDITIONS
Symbol
Parameter
Min
Typ
Max
Unit
V_CC
Supply Voltage
Operating
Data Retention Only
2.0
3.3
3.6
V
1.5
3.3
3.6
V_I
Input Voltage
V_O
Output Voltage
0
(HIGH or LOW State)
0
(3−State)
0
5.5
V
V_CC
V
5.5
I_OH
HIGH Level Output Current, V_CC = 3.0 V − 3.6 V
I_OL
LOW Level Output Current, V_CC = 3.0 V − 3.6 V
I_OH
HIGH Level Output Current, V_CC = 2.7 V − 3.0 V
I_OL
LOW Level Output Current, V_CC = 2.7 V − 3.0 V
T_A
Operating Free−Air Temperature
−40
Dt/DV Input Transition Rise or Fall Rate, V_IN from 0.8 V to 2.0 V, V_CC = 3.0 V
0
−24
mA
24
mA
−12
mA
12
mA
+85
°C
10
ns/V
ORDERING INFORMATION
Device
Package
Shipping^†
MC74LCX374DWR2
SOIC−20
1000 Tape & Reel
MC74LCX374DR2G
SOIC−20
(Pb−Free)
1000 Tape & Reel
MC74LCX374DTR2
TSSOP−20*
2000 Tape & Reel
MC74LCX374MEL
SOEIAJ−20
2000 Tape & Reel
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
*This package is inherently Pb−Free.
DC ELECTRICAL CHARACTERISTICS
Symbol
Characteristic
Condition
V_IH
HIGH Level Input Voltage (Note 2)
V_IL
LOW Level Input Voltage (Note 2)
V_OH
HIGH Level Output Voltage
2.7 V ≤ V_CC ≤ 3.6 V
2.7 V ≤ V_CC ≤ 3.6 V
2.7 V ≤ V_CC ≤ 3.6 V; I_OH = −100 mA
V_CC = 2.7 V; I_OH = −12 mA
V_CC = 3.0 V; I_OH = −18 mA
V_CC = 3.0 V; I_OH = −24 mA
2. These values of V_I are used to test DC electrical characteristics only.
T_A = −40°C to +85°C
Min
Max
Unit
2.0
V
0.8
V
V_CC − 0.2
V
2.2
2.4
2.2
http://onsemi.com
3