MC74LCX16245_12 Datasheet, PDF (3/7 Pages) ON Semiconductor – Low-Voltage CMOS 16-Bit Transceiver

MC74LCX16245
ORDERING INFORMATION
Device
Package
Shipping^†
MC74LCX16245DTG
TSSOP−48*
39 Units / Rail
M74LCX16245DTR2G
TSSOP−48*
2500 / Tape & Reel
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
*This package is inherently Pb−Free.
MAXIMUM RATINGS
Symbol
Parameter
Condition
Value
Units
V_CC DC Supply Voltage
−0.5 to +7.0
V
V_I
DC Input Voltage
−0.5 ≤ V_I ≤ +7.0
V
V_O DC Output Voltage
Output in 3−State
−0.5 ≤ V_O ≤ +7.0
V
Output in HIGH or LOW State. (Note 1) −0.5 ≤ V_O ≤ V_CC + 0.5
V
I_IK
DC Input Diode Current
V_I < GND
−50
mA
I_OK DC Output Diode Current
V_O < GND
−50
mA
V_O > V_CC
+50
mA
I_O
DC Output Source/Sink Current
±50
mA
I_CC DC Supply Current Per Supply Pin
±100
mA
I_GND DC Ground Current Per Ground Pin
±100
mA
T_STG Storage Temperature Range
−65 to +150
°C
Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit
values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied,
damage may occur and reliability may be affected.
1. I_O absolute maximum rating must be observed.
RECOMMENDED OPERATING CONDITIONS
Symbol
Parameter
Min
Typ
Max
Units
V_CC Supply Voltage
Operating
Data Retention Only
V
2.0
2.5, 3.3
3.6
1.5
2.5, 3.3
3.6
V_I
Input Voltage
V_O Output Voltage
(HIGH or LOW State)
(3−State)
0
5.5
V
V
0
V_CC
0
5.5
I_OH HIGH Level Output Current
V_CC = 3.0 V − 3.6 V
V_CC = 2.7 V − 3.0 V
V_CC = 2.3 V − 2.7 V
I_OL LOW Level Output Current
V_CC = 3.0 V − 3.6 V
V_CC = 2.7 V − 3.0 V
V_CC = 2.3 V − 2.7 V
T_A
Operating Free−Air Temperature
−40
Dt/DV Input Transition Rise or Fall Rate, V_IN from 0.8 V to 2.0 V, V_CC = 3.0 V
0
mA
−24
−12
−8
mA
+24
+12
+8
+85
°C
10
ns/V
http://onsemi.com
3