MC74LCX16244_12 Datasheet, PDF (3/7 Pages) ON Semiconductor – Low-Voltage CMOS 16-Bit Buffer

MC74LCX16244
ORDERING INFORMATION
Device
Package
Shipping^†
MC74LCX16244DTG
TSSOP−48
(Pb−Free)
39 Units / Rail
M74LCX16244DTR2G
TSSOP−48
(Pb−Free)
2500 / Tape & Reel
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
MAXIMUM RATINGS
Symbol
Parameter
Value
Condition
Units
V_CC DC Supply Voltage
−0.5 to +7.0
V
V_I
DC Input Voltage
−0.5 ≤ V_I ≤ +7.0
V
V_O DC Output Voltage
−0.5 ≤ V_O ≤ +7.0
Output in 3−State
V
−0.5 ≤ V_O ≤ V_CC + 0.5
Output in HIGH or LOW State (Note 1)
V
I_IK
DC Input Diode Current
−50
V_I < GND
mA
I_OK DC Output Diode Current
−50
V_O < GND
mA
+50
V_O > V_CC
mA
I_O
DC Output Source/Sink Current
±50
mA
I_CC DC Supply Current Per Supply Pin
±100
mA
I_GND DC Ground Current Per Ground Pin
±100
mA
T_STG Storage Temperature Range
−65 to +150
°C
MSL Moisture Sensitivity
Level 1
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
1. I_O absolute maximum rating must be observed.
RECOMMENDED OPERATING CONDITIONS
Symbol
Parameter
Min
Typ
Max
Units
V_CC Supply Voltage
Operating
Data Retention Only
V
2.0
2.5, 3.3
3.6
1.5
2.5, 3.3
3.6
V_I
Input Voltage
V_O Output Voltage
(HIGH or LOW State)
(3−State)
0
5.5
V
V
0
V_CC
0
5.5
I_OH HIGH Level Output Current
V_CC = 3.0 V − 3.6 V
V_CC = 2.7 V − 3.0 V
V_CC = 2.3 V − 2.7 V
I_OL LOW Level Output Current
V_CC = 3.0 V − 3.6 V
V_CC = 2.7 V − 3.0 V
V_CC = 2.3 V − 2.7 V
T_A
Operating Free−Air Temperature
−40
Dt/DV Input Transition Rise or Fall Rate, V_IN from 0.8 V to 2.0 V, V_CC = 3.0 V
0
mA
−24
−12
−8
mA
+24
+12
+8
+85
°C
10
ns/V
http://onsemi.com
3