MC74LCX157_12 Datasheet, PDF (3/7 Pages) ON Semiconductor – Low-Voltage CMOS Quad 2-Input Multiplexer

MC74LCX157
ABSOLUTE MAXIMUM RATINGS
Symbol
Parameter
Value
Condition
Units
V_CC DC Supply Voltage
−0.5 to +7.0
V
V_I
DC Input Voltage
−0.5  V_I  +7.0
V
V_O DC Output Voltage
−0.5  V_O  V_CC + 0.5
(Note 1)
V
I_IK
DC Input Diode Current
−50
V_I < GND
mA
I_OK DC Output Diode Current
−50
V_O < GND
mA
+50
V_O > V_CC
mA
I_O
DC Output Source/Sink Current
50
mA
I_CC DC Supply Current Per Supply Pin
100
mA
I_GND DC Ground Current Per Ground Pin
100
mA
T_STG Storage Temperature Range
−65 to +150
C
MSL Moisture Sensitivity
Level 1
Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit
values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied,
damage may occur and reliability may be affected.
1. Output in HIGH or LOW State. I_O absolute maximum rating must be observed.
RECOMMENDED OPERATING CONDITIONS
Symbol
Parameter
V_CC Supply Voltage
Operating
Data Retention Only
V_I
V_O
I_OH
I_OL
I_OH
I_OL
T_A
Dt/DV
Input Voltage
Output Voltage (HIGH or LOW State)
HIGH Level Output Current, V_CC = 3.0 V − 3.6 V
LOW Level Output Current, V_CC = 3.0 V − 3.6 V
HIGH Level Output Current, V_CC = 2.7 V − 3.0 V
LOW Level Output Current, V_CC = 2.7 V − 3.0 V
Operating Free−Air Temperature
Input Transition Rise or Fall Rate, V_IN from 0.8 V to 2.0 V,
V_CC = 3.0 V
Min
Typ
Max
Units
V
2.0
3.3
3.6
1.5
3.3
3.6
0
5.5
V
0
V_CC
V
−24
mA
24
mA
−12
mA
12
mA
−40
+85
C
0
10
ns/V
ORDERING INFORMATION
Device
Package
Shipping^†
MC74LCX157DR2G
SOIC−16
(Pb−Free)
2500 Tape & Reel
MC74LCX157DTG
TSSOP−16
(Pb−Free)
96 Units / Rail
MC74LCX157DTR2G
TSSOP−16
(Pb−Free)
2500 Tape & Reel
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
http://onsemi.com
3