MC74HCT365A Datasheet, PDF (3/7 Pages) ON Semiconductor – Hex 3-State Noninverting Buffer with Common Enables and LSTTL Compatible Inputs

MC74HCT365A
MAXIMUM RATINGS*
Symbol
Parameter
Value
Unit
V_CC DC Supply Voltage (Referenced to GND)
– 0.5 to + 7.0
V
V_in DC Input Voltage (Referenced to GND)
– 0.5 to V_CC + 0.5 V
V_out DC Output Voltage (Referenced to GND)
– 0.5 to V_CC + 0.5 V
I_in
DC Input Current, per Pin
± 20
mA
I_out DC Output Current, per Pin
± 25
mA
I_CC DC Supply Current, V_CC and GND Pins
± 50
mA
P_D Power Dissipation in Still Air,
SOIC Package†
500
mW
TSSOP Package†
450
T_stg Storage Temperature
– 65 to + 150
_C
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress
ratings only. Functional operation above the Recommended Operating Conditions is not implied.
Extended exposure to stresses above the Recommended Operating Conditions may affect device
reliability.
†Derating — SOIC Package: – 7 mW/_C from 65_ to 125_C
TSSOP Package: − 6.1 mW/_C from 65_ to 125_C
This device contains protection
circuitry to guard against damage
due to high static voltages or electric
fields. However, precautions must
be taken to avoid applications of any
voltage higher than maximum rated
voltages to this high−impedance cir-
cuit. For proper operation, V_in and
V_out should be constrained to the
range GND v (V_in or V_out) v V_CC.
Unused inputs must always be
tied to an appropriate logic voltage
level (e.g., either GND or V_CC).
Unused outputs must be left open.
RECOMMENDED OPERATING CONDITIONS
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ _Symbol
Parameter
Min
Max Unit
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ _{VCC DC Supply Voltage (Referenced to GND)}
4.5
5.5
V
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ _{Vin, Vout DC Input Voltage, Output Voltage (Referenced to GND)}
0
V_CC
V
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ _{TA Operating Temperature Range, All Package Types}
–55
+125
_C
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ _{tr, tf Input Rise/Fall Time (Figure 1)}
0
500
ns
DC ELECTRICAL CHARACTERISTICS (Voltages Referenced to GND)
Guaranteed Limit
Symbol
Parameter
Test Conditions
V_CC
– 55 to
V
25_C v 85_C v 125_C _Unit
V_IH
Minimum High−Level Input
Voltage
V_out = V_CC – 0.1 V
|I_out| v 20 μA
4.5
2.0
2.0
2.0
V
to
5.5
V_IL
Maximum Low−Level Input
Voltage
V_out = 0.1 V
|I_out| v 20 μA
4.5
0.8
0.8
0.8
V
to
5.5
V_OH
Minimum High−Level Output
Voltage
V_in = V_IH
|I_out| v 20 μA
4.5
4.4
4.4
4.4
V
V_in = V_IH
|I_out| v 6.0 mA 4.5
3.98
3.84
3.70
V_OL
Maximum Low−Level Output
Voltage
V_in = V_IL
|I_out| v 20 μA
4.5
0.1
0.1
0.1
V
V_in = V_IL
|I_out| v 6.0 mA 4.5
I_in
Maximum Input Leakage Current V_in = V_CC or GND
4.5
0.26
±0.1
0.33
±1.0
0.40
±1.0
μA
I_OZ
Maximum Three−State
Leakage Current
Output in High−Impedance State 4.5
V_in = V_IL or V_IH
V_out = V_CC or GND
±0.5
±5.0
±10
μA
I_CC
Maximum Quiescent Supply
Current (per Package)
V_in = V_CC or GND
I_out = 0 μA
4.5
4
40
160
μA
DI_CC
Additional Quiescent Supply
Current
V_in = 2.4V, Any One Input
V_in = V_CC or GND, Other Inputs
I_out = 0mA
5.5
≥ −55°C
2.9
25 to 125°C
2.4
mA
http://onsemi.com
3