MC74HC238A_13 Datasheet, PDF (3/9 Pages) ON Semiconductor – 1-of-8 Decoder/ Demultiplexer

MC74HC238A
MAXIMUM RATINGS
Symbol
Parameter
Value
Unit
V_CC DC Supply Voltage (Referenced to GND)
– 0.5 to + 7.0
V
V_in DC Input Voltage (Referenced to GND)
– 0.5 to V_CC + 0.5
V
V_out DC Output Voltage (Referenced to GND)
– 0.5 to V_CC + 0.5
V
I_in
DC Input Current, per Pin
± 20
mA
I_out DC Output Current, per Pin
± 25
mA
I_CC DC Supply Current, V_CC and GND Pins
± 50
mA
P_D Power Dissipation in Still Air,
Plastic DIP†
750
mW
SOIC Package†
500
TSSOP Package†
450
T_stg Storage Temperature
– 65 to + 150
°C
T_L Lead Temperature, 1 mm from Case for 10 Seconds
°C
(Plastic DIP, SOIC or TSSOP Package)
260
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress
ratings only. Functional operation above the Recommended Operating Conditions is not implied.
Extended exposure to stresses above the Recommended Operating Conditions may affect device
reliability.
†Derating − Plastic DIP: – 10 mW/°C from 65° to 125°C
SOIC Package: – 7 mW/°C from 65° to 125°C
TSSOP Package: − 6.1 .W/°C from 65° to 125°C
RECOMMENDED OPERATING CONDITIONS
Symbol
Parameter
Min
V_CC DC Supply Voltage (Referenced to GND)
2.0
V_in, V_out DC Input Voltage, Output Voltage (Referenced to GND)
0
T_A Operating Temperature, All Package Types
– 55
t_r, t_f Input Rise and Fall Time
(Figure 2)
V_CC = 2.0 V
0
V_CC = 4.5 V
0
V_CC = 6.0 V
0
Max
6.0
V_CC
+ 125
1000
500
400
Unit
V
V
°C
ns
This device contains protection
circuitry to guard against damage
due to high static voltages or electric
fields. However, precautions must
be taken to avoid applications of any
voltage higher than maximum rated
voltages to this high−impedance cir-
cuit. For proper operation, V_in and
V_out should be constrained to the
range GND v (V_in or V_out) v V_CC.
Unused inputs must always be
tied to an appropriate logic voltage
level (e.g., either GND or V_CC).
Unused outputs must be left open.
http://onsemi.com
3