MC10H164_16 Datasheet, PDF (3/6 Pages) ON Semiconductor – 8‐Line Multiplexer

MC10H164
Table 2. ELECTRICAL CHARACTERISTICS (V_EE = −5.2 V ±5%) (Note 1)
0°
25°
75°
Symbol
Characteristic
Min
Max
Min
Max
Min
Max
Unit
I_E
Power Supply Current
−
83
−
75
−
83
mA
I_inH
Input Current High
−
512
−
320
−
320
mA
I_inL
Input Current Low
0.7
−
0.7
−
0.7
−
mA
V_OH
High Output Voltage
−1.02
−0.84
−0.98
−0.81
−0.92
−0.735
Vdc
V_OL
Low Output Voltage
−1.95
−1.63
−1.95
−1.63
−1.95
−1.60
Vdc
V_IH
High Input Voltage
−1.17
−0.84
−1.13
−0.81
−1.07
−0.735
Vdc
V_IL
Low Input Voltage
−1.95
−1.48
−1.95
−1.48
−1.95
−1.45
Vdc
1. Each MECL 10H series circuit has been designed to meet the dc specifications shown in the test table, after thermal equilibrium has been
established. The circuit is in a test socket or mounted on a printed circuit board and transverse air flow greater than 500 linear fpm is
maintained. Outputs are terminated through a 50 W resistor to −2.0 V.
Table 3. AC PARAMETERS
0°
25°
75°
Symbol
Characteristic
Min
Max
Min
Max
Min
Max
Unit
t_pd
Propagation Delay
Enable
Data
Address
ns
0.4
1.45
0.4
1.5
0.5
1.7
0.7
2.4
0.8
2.5
0.9
2.6
1.0
2.8
1.1
2.9
1.2
3.2
t_r
Rise Time
0.5
1.5
0.5
1.6
0.5
1.7
ns
t_f
Fall Time
0.5
1.5
0.5
1.6
0.5
1.7
ns
NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit
board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared
operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit
values are applied individually under normal operating conditions and not valid simultaneously.
www.onsemi.com
3