CM2020-00TR Datasheet, PDF (3/13 Pages) ON Semiconductor – HDMI Transmitter Port Protection and Interface Device

CM2020-00TR
Pin Descriptions
PINS
4, 35
6, 33
7, 32
9, 30
10, 29
12, 27
13, 26
15, 24
16
23
17
22
18
21
19
20
2
1
38
37
3, 36
5, 34, 8, 31,
11, 28, 14,
25
NAME
TMDS_D2+
TMDS_D2-
TMDS_D1+
TMDS_D1-
TMDS_D0+
TMDS_D0-
TMDS_CK+
TMDS_CK-
CE_REMOTE_IN
CE_REMOTE_OUT
DDC_CLK_IN
DDC_CLK_OUT
DDC_DAT_IN
DDC_DAT_OUT
HOTPLUG_DET_IN
HOTPLUG_DET_OUT
LV_SUPPLY
5V_SUPPLY
5V_OUT
ESD_BYP
GND
TMDS_GND
PIN DESCRIPTIONS
ESD Level DESCRIPTION
8kV³
TMDS 0.9pF ESD protection¹.
8kV³
TMDS 0.9pF ESD protection¹.
8kV³
TMDS 0.9pF ESD protection¹.
8kV³
TMDS 0.9pF ESD protection¹.
8kV³
TMDS 0.9pF ESD protection¹.
8kV³
TMDS 0.9pF ESD protection¹.
8kV³
TMDS 0.9pF ESD protection¹.
8kV³
TMDS 0.9pF ESD protection¹.
2kV⁴
LV_SUPPLY referenced logic level into ASIC.
8kV³
5V_SUPPLY referenced logic level out plus 3.5pF ESD to connector.
2kV⁴
LV_SUPPLY referenced logic level into ASIC.
8kV³
5V_SUPPLY referenced logic level out plus 3.5pF ESD to connector.
2kV⁴
LV_SUPPLY referenced logic level into ASIC.
8kV³
5V_SUPPLY referenced logic level out plus 3.5pF ESD to connector.
2kV⁴
LV_SUPPLY referenced logic level into ASIC.
8kV³
5V_SUPPLY referenced logic level out plus 3.5pF ESD² to connector
2kV⁴
Bias for CE / DDC / HOTPLUG level shifters.
2kV⁴
Current source for 5V_OUT.
8kV³
2kV⁴
55mA minimum overcurrent protected 5V output. This output must be
bypassed with a 0.1µF ceramic capacitor.
This pin must be connected to a 0.1µF ceramic capacitor.
N/A
Supply GND reference.
N/A
TMDS ESD and Parasitic GND return.⁵
Note 1: These 2 pins need to be connected together in-line on the PCB.
Note 2: This output can be connected to an external 0.1µF ceramic capacitor, resulting in an increased ESD withstand voltage
rating.
Note 3: Standard IEC 61000-4-2, C_DISCHARGE=150pF, Ω R_DISCHARGE=330 , 5V_SUPPLY and LV_SUPPLY within recommended
operating conditions, GND=0V and ESD_BYP (pin 37), 5V_OUT (pin 38), and HOTPLUG_DET_OUT (pin 20) each
bypassed with a 0.1µF ceramic capacitor connected to GND.
Note 4: Human Body Model per MIL-STD-883, Method 3015, C_DISCHARGE=100pF, Ω R_DISCHARGE=1.5k , 5V_SUPPLYand LV_SUPPLY
within recommended operating conditions, GND=0V and ESD_BYP (pin 37), 5V_OUT (pin 38), and
HOTPLUG_DET_OUT (pin 20) each bypassed with a 0.1µF ceramic capacitor connected to GND.
Note 5: These pins should be routed directly to the associated GND pins on the HDMI connector with single point ground vias at
the connector
Rev. 4 | Page 3 of 13 | www.onsemi.com