CM1693-06DE Datasheet, PDF (3/6 Pages) ON Semiconductor – Praetorian L-C LCD and Camera EMI Array with ESD Protection

CM1693-06DE
Absolute Maximum Ratings
PARAMETER
Storage Temperature Range
DC current per Inductor
DC Package Power Rating
Standard Operating Conditions
PARAMETER
Operating Temperature Range
RATING
-65 to +150
30
500
RATING
-40 to +85
UNITS
°C
mA
mW
UNITS
°C
Electrical Operating Characteristics (see Note 1)
SYMBOL PARAMETER
L
Channel Inductance
C_TOTAL Total Channel Capacitance
V_DIODE
I_LEAK
Standoff Voltage
Diode Leakage Current (reverse bias)
CONDITIONS
At 2.5VDC Reverse
Bias, 1MHz, 30mVAC
I_DIODE =10μA
V_DIODE =+3.3V
MIN TYP
26
17.6 22
5.5
0.1
MAX
26.4
1.0
UNITS
nH
pF
V
μA
V_SIG
Signal Clamp Voltage
Positive Clamp
Negative Clamp
I_LOAD = 10mA
I_LOAD = -10mA
V_ESD
In-system ESD Withstand Voltage
Notes 2 and 3
Contact Discharge per IEC 61000-4-2 Level 4
R_DYN
Dynamic Resistance
Positive
Negative
f_R
Roll-off Frequency at -6dB Attenuation
Z_SOURCE=50Ω, Z_LOAD=50Ω
5.6 6.8
9.0
V
-1.5 -0.8
-0.4
V
±18
kV
2.3
Ω
0.9
Ω
300
MHz
Note 1: T_A=25°C unless otherwise specified.
Note 2: ESD applied to input and output pins with respect to GND, one at a time.
Note 3: Clamping voltage is measured at the opposite side of the EMI filter to the ESD pin (i.e. if ESD is applied to pin A1 then
clamping voltage is measured at pin C1). Unused pins are left open.
Rev. 2 | Page 3 of 6 | www.onsemi.com