CM1457_13 Datasheet, PDF (3/7 Pages) ON Semiconductor – 8-Channel EMI Filter Array with ESD Protection

CM1457
SPECIFICATIONS
Table 2. ABSOLUTE MAXIMUM RATINGS
Parameter
Rating
Units
Storage Temperature Range
−65 to +150
°C
DC current per Inductor
15
mA
DC Package Power Rating
0.5
W
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
Table 3. STANDARD OPERATING CONDITIONS
Parameter
Operating Temperature Range
Rating
−40 to +85
Units
°C
Table 4. ELECTRICAL OPERATING CHARACTERISTICS (Note 1)
Symbol
Parameter
Conditions
L_TOT
R_TOT
C_{TOT_0V}
C_{TOT_2.5V}
Total Channel Inductance
Total Channel DC Resistance
Total Channel Capacitance, 0 V bias
Total Channel Capacitance, 2.5 V bias
0 V dc; 1 MHz, 30 mV rms
2.5 V dc; 1 MHz,
30 mV rms
V_ST
I_LEAK
V_SIG
V_ESD
Stand−off Voltage
Diode Leakage Current
Signal Clamp Voltage
Positive Clamp
Negative Clamp
In−system ESD Withstand Voltage
a) Contact Discharge per IEC 61000−4−2 standard,
Level 4 (External Pins)
b) Contact Discharge per IEC 61000−4−2 standard,
Level 4 (Internal Pins)
I = 10 mA
V_IN = +3.3 V
I_LOAD = 10 mA
I_LOAD = −10 mA
(Notes 2 and 3)
f_C
Cut−off Frequency
Z_SOURCE = 50 W, Z_LOAD = 50 W
1. T_A = 25°C unless otherwise specified.
2. ESD applied to input and output pins with respect to GND, one at a time.
3. Unused pins are left open.
Min Typ Max
70
45
20
24
12.5
5.5
0.1 0.5
5.6 6.8 9.0
−1.5 −0.8 −0.4
±15
±2
300
Units
nH
W
pF
pF
V
mA
V
kV
MHz
APPLICATION INFORMATION
Refer to Application Note “The Chip Scale Package”, for a detailed description of Chip Scale Packages offered by
ON Semiconductor.
http://onsemi.com
3