CAT6202_14 Datasheet, PDF (3/10 Pages) ON Semiconductor – 500 mA / 13 V Adjustable CMOS LDO Regulator

CAT6202
Table 1. PIN FUNCTION DESCRIPTION
Pin No.
Pin Name
Description
1
VIN
Supply voltage input
2
FLT
Fault indicator (active low)
3
EN
Enable input (active high)
4
BYP
A capacitor between BYP and GND controls the regulator’s turn−on speed and improves PSRR
5
GND
Ground reference
6
ILIM
Current limit control pin
7
VADJ
Output voltage adjustment
8
VOUT
LDO Output Voltage
Table 2. ABSOLUTE MAXIMUM RATINGS
Rating
Value
Unit
V_IN, V_OUT
All other pins
0 to 16
V
−0.3 to +6.0
V
Junction Temperature, T_J
Power Dissipation, P_D
Storage Temperature Range, T_S
Lead Temperature (soldering, 5 sec.)
+150
_C
Internally Limited (Note 1)
mW
−65 to +150
_C
260
_C
ESD Rating (Human Body Model)
1000
V
ESD Rating (Machine Model)
350
V
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
1. The maximum allowable power dissipation at any T_A (ambient temperature) is P_Dmax = (T_Jmax – T_A) / θ_JA. Exceeding the maximum allowable
power dissipation will result in excessive die temperature, and the regulator will go into thermal shutdown.
Table 3. RECOMMENDED OPERATING CONDITIONS (Note 2)
Parameter
Range
Unit
V_IN, V_OUT
All other pins
3.3 to 13.5
V
0 to 6.0
V
Junction Temperature Range, T_J
−40 to +125
_C
Package Thermal Resistance (SOIC), θ_JA
235
_C/W
Package Thermal Resistance (TDFN), θ_JA
92
_C/W
Functional operation above the stresses listed in the Recommended Operating Ranges is not implied. Extended exposure to stresses beyond
the Recommended Operating Ranges limits may affect device reliability.
2. The device is not guaranteed to work outside its operating rating.
http://onsemi.com
3