CAT6201 Datasheet, PDF (3/10 Pages) ON Semiconductor – 300 mA / 13 V Adjustable CMOS LDO Regulator

CAT6201
Table 1. PIN FUNCTION DESCRIPTION
Pin No.
Pin Name
Description
1
VIN
Supply voltage input
2
FLT
Fault indicator (active low)
3
EN
Enable input (active high)
4
BYP
A capacitor between BYP and GND controls the regulator’s turn−on speed and improves PSRR
5
GND
Ground reference
6
ILIM
Current limit control pin
7
VADJ
Output voltage adjustment
8
VOUT
LDO Output Voltage
Backside pad in center of package provides thermal contact for cooling, typically via the PCB ground
Pad
−
plane. This pad is electrically active and connected to GND internally. An external Ground connection
is not required and the pad may be left floating.
Table 2. ABSOLUTE MAXIMUM RATINGS
Rating
Value
Unit
V_IN, V_OUT
All other pins
0 to 16
V
−0.3 to +6.0
V
Junction Temperature, T_J
Power Dissipation, P_D
Storage Temperature Range, T_S
Lead Temperature (soldering, 5 sec.)
+150
_C
Internally Limited (Note 1)
mW
−65 to +150
_C
260
_C
ESD Rating (Human Body Model)
1000
V
ESD Rating (Machine Model)
200
V
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
1. The maximum allowable power dissipation at any T_A (ambient temperature) is P_Dmax = (T_Jmax – T_A) / θ_JA. Exceeding the maximum allowable
power dissipation will result in excessive die temperature, and the regulator will go into thermal shutdown.
Table 3. RECOMMENDED OPERATING CONDITIONS (Note 2)
Parameter
V_IN, V_OUT
All other pins
Junction Temperature Range, T_J
Package Thermal Resistance (SOIC), θ_JA
Package Thermal Resistance (TDFN), θ_JA
2. The device is not guaranteed to work outside its operating rating.
Range
3.3 to 13.5
0 to 6.0
−40 to +125
235
92
Unit
V
V
_C
_C/W
_C/W
http://onsemi.com
3