MT9J003_16 Datasheet, PDF (27/77 Pages) ON Semiconductor – 1/2.3-Inch 10 Mp CMOS Digital Image Sensor

MT9J003: 1/2.3-Inch 10 Mp CMOS Digital Image Sensor
Two-Wire Serial Register Interface
Sequential WRITE, Start at Random Location
This sequence (Figure 21) starts in the same way as the single WRITE to random location
(Figure 20 on page 26). Instead of generating a no-acknowledge bit after the first byte of
data has been transferred, the master generates an acknowledge bit and continues to
perform byte WRITEs until “L” bytes have been written. The WRITE is terminated by the
master generating a stop condition.
Figure 21: Sequential WRITE, Start at Random Location
Previous Reg Address, N
Reg Address, M M+1
S Slave Address 0 A Reg Address[15:8] A Reg Address[7:0] A Write Data A
M+1
M+2
M+3
Write Data A Write Data A
M+L-2
Write Data A
M+L-1
M+L
Write Data
A
AP
MT9J003-DS Rev. E 5/15 EN
27
©Semiconductor Components Industries, LLC,2015.