LC88F58B0A Datasheet, PDF (24/31 Pages) Sanyo Semicon Device – FROM 128K byte, RAM 4096K byte on-chip 16-bit 1-chip Microcontroller

LC88F58B0A
Continued from preceding page.
Parameter
Symbol
Applicable
Pin/Remarks
Conditions
VDD[V]
min
HALT mode
consumption
current
(Note 7-1)
IDDHALT(1)
VDD1
=VDD2
=VDD3
• HALT mode
• FmCF=12MHz ceramic mode
• FmX'tal=32.768kHz crystal oscillation mode
• System clock set to 12MHz
4.5 to 5.5
• Internal RC oscillation stopped
• 1/1 frequency division mode
Specification
typ
max unit
2.9
4.4
IDDHALT(2)
IDDHALT(3)
• HALT mode
• FmCF=10MHz ceramic oscillator mode
• FmX'tal=32.768kHz crystal oscillator mode
• System clock set to 10MHz
• Internal RC oscillation stopped
• 1/1 frequency division mode
4.5 to 5.5
3.0 to 4.5
2.5
4.2
1.3
3.0
mA
IDDHALT(4)
IDDHALT(5)
• HALT mode
• FmCF=4MHz ceramic oscillator mode
• FmX'tal=32.768kHz crystal oscillator mode
• System clock set to 4MHz
• Internal RC oscillation stopped
• 1/2 frequency division mode
4.5 to 5.5
2.2 to 4.5
0.90
1.6
0.40
1.1
IDDHALT(6)
IDDHALT(7)
IDDHALT(8)
IDDHALT(9)
• HALT mode
• FmCF=0Hz (oscillation stopped)
• FmX'tal=32.768kHz crystal oscillator mode
• System clock set to internal RC oscillation
• 1/1 frequency division mode
• HALT mode
• FmCF=0Hz (oscillation stopped)
• FmX'tal=32.768kHz crystal oscillator mode
• System clock set to 32.768kHz
• Internal RC oscillation stopped
• 1/1 frequency division mode
4.5 to 5.5
2.2 to 4.5
4.5 to 5.5
2.2 to 4.5
0.42
1.25
0.20
0.85
23
90
μA
10
40
HOLD mode
consumption
current
IDDHOLD(1)
IDDHOLD(2)
VDD1
HOLD mode
• CF1=VDD or open (external clock mode)
4.5 to 5.5
2.2 to 4.5
0.05
20
0.03
15
HOLDX
mode
consumption
current
IDDHOLD(3)
IDDHOLD(4)
HOLDX mode
• CF1=VDD or open (external clock mode)
• FmX'tal=32.768kHz crystal oscillator mode
4.5 to 5.5
2.2 to 4.5
μA
15
58
4
35
Note 7-1: The consumption current value includes none of the currents that flow into the output transistor and internal
pull-up resistors.
No.A1951-24/31