FS6377 Datasheet, PDF (22/24 Pages) ON Semiconductor – Programmable 3-PLL Clock Generator IC

FS6377
Figure 13: Warning Message- Click”Ignore”
Figure 14: Opening Screen
10.2.1. Example Programming
Type a value for the crystal resonator frequency in MHz in the reference crystal box. This frequency provides the basis for all of the PLL
calculations that follow.
Next, click on the PLL A box. A pop-up screen similar to Figure 15 should appear. Type in a desired output clock frequency in MHz, set
the operating voltage (3.3V or 5V) and the desired maximum output frequency error. Pressing Calculate Solutions generates several
possible divider and VCO-speed combinations.
Rev. 4 | Page 22 of 24 | www.onsemi.com