SL05T1G Datasheet, PDF (2/5 Pages) ON Semiconductor – Capacitance TVS

SL05T1G Series
MAXIMUM RATINGS
Rating
Symbol
Value
Unit
Peak Power Dissipation @ 8x20 usec (Note 1)
@ T_L ≤ 25°C
IEC 61000−4−2
Level 4
Contact Discharge
Air Discharge
IEC 61000−4−4
EFT
IEC 61000−4−5
Lightning
Total Power Dissipation on FR−5 Board (Note 2) @ T_A = 25°C
Derate above 25°C
P_pk
V_pp
°P_D°
300
W
±8
kV
±16
kV
40
A
12
A
225
°mW°
1.8
mW/°C
Thermal Resistance Junction to Ambient
Total Power Dissipation on Alumina Substrate (Note 3) @ T_A = 25°C
Derate above 25°C
R_qJA
°P_D°
556
°C/W
300
°mW
2.4
mW/°C
Thermal Resistance Junction−to−Ambient
R_qJA
417
°C/W
Junction and Storage Temperature Range
T_J, T_stg
− 55 to +150
°C
Lead Solder Temperature − Maximum (10 Second Duration)
T_L
260
°C
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
1. Non−repetitive current pulse per Figure 2
2. FR−5 = 1.0 x 0.75 x 0.62 in.
3. Alumina = 0.4 x 0.3 x 0.024 in., 99.5% alumina
ELECTRICAL CHARACTERISTICS
(T_A = 25°C unless otherwise noted)
UNIDIRECTIONAL
Symbol
Parameter
I_PP
V_C
V_RWM
I_R
V_BR
I_T
QV_BR
I_F
V_F
Z_ZT
I_ZK
Z_ZK
Maximum Reverse Peak Pulse Current
Clamping Voltage @ I_PP
Working Peak Reverse Voltage
Maximum Reverse Leakage Current @ V_RWM
Breakdown Voltage @ I_T
Test Current
Maximum Temperature Coefficient of V_BR
Forward Current
Forward Voltage @ I_F
Maximum Zener Impedance @ I_ZT
Reverse Current
Maximum Zener Impedance @ I_ZK
I
I_F
V_C V_BR V_RWM
II^{RT VF}
V
I_PP
Uni−Directional TVS
ELECTRICAL CHARACTERISTICS
Device ^VRWM
Device Marking ^(V)
I_R @ V_RWM
(mA)
Breakdown Voltage
(Note 4)
V_BR @ 1 mA (Volts)
V_C, Clamping Voltage
(Note 5)
@1A
@5A
Max
I_PP
Min
Max
(V)
(V)
(A)
Capacitance
@ V_R = 0 V, 1 MHz (pF)
Typ
Max
SL05
L05
5.0
20
6.0
8.0
9.8
11
17
3.5
5.0
SL12
L12
12
1.0
13.3
15.5
19
24
12
3.5
5.0
SL15
L15
15
1.0
16.7
18.5
24
30
10
3.5
5.0
SL24
L24
24
1.0
26.7
29
43
55
5.0
3.5
5.0
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
4. V_BR measured at pulse test current of 1 mA at an ambient temperature of 25°C
5. Surge current waveform per Figure 2
www.onsemi.com
2