NSIC2020JBT3G Datasheet, PDF (2/8 Pages) ON Semiconductor – Constant Current Regulator & LED Driver

NSIC2020JBT3G
MAXIMUM RATINGS (T_A = 25°C unless otherwise noted)
Rating
Symbol
Value
Unit
Anode−Cathode Voltage
Vak Max
120
V
Reverse Voltage
Operating Junction and Storage Temperature Range
ESD Rating: Human Body Model
Machine Model
V_R
T_J, T_stg
ESD
500
mV
−55 to +175
°C
Class 3A (4000 V)
Class C (400 V)
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
ELECTRICAL CHARACTERISTICS (T_A = 25°C unless otherwise noted)
Characteristic
Symbol
Min
Typ
Max
Unit
Steady State Current @ Vak = 7.5 V (Note 1)
I_reg(SS)
17
20
23
mA
Voltage Overhead (Note 2)
V_overhead
1.8
V
Pulse Current @ Vak = 7.5 V (Note 3)
I_reg(P)
17.3
20.9
24.3
mA
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
1. I_reg(SS) steady state is the voltage (Vak) applied for a time duration ≥ 80 sec, using 100 mm² , 1 oz. Cu (or equivalent), in still air.
2. V_overhead = V_in − V_LEDs. V_overhead is typical value for 85% I_reg(SS).
3. I_reg(P) non−repetitive pulse test. Pulse width t ≤ 360 msec.
Figure 1. CCR Voltage−Current Characteristic
http://onsemi.com
2