|
NSI45060JDT4G_14 Datasheet, PDF (2/8 Pages) ON Semiconductor – Adjustable Constant Current Regulator & LED Driver | |||
|
◁ |
NSI45060JDT4G
MAXIMUM RATINGS (TA = 25°C unless otherwise noted)
Rating
Symbol
Value
Unit
AnodeâCathode Voltage
Vak Max
45
V
Reverse Voltage
Operating and Storage Junction Temperature Range
ESD Rating:
Human Body Model
Machine Model
VR
TJ, Tstg
ESD
500
mV
â55 to +175
°C
Class 3A (4000 V)
Class B (200 V)
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted)
Characteristic
Symbol
Min
Typ
Max Unit
Steady State Current @ Vak = 7.5 V (Note 1)
Voltage Overhead (Note 2)
Pulse Current @ Vak = 7.5 V (Note 3)
Capacitance @ Vak = 7.5 V (Note 4)
Ireg(SS)
Voverhead
Ireg(P)
C
51
54.7
60
69
mA
1.8
V
66
76.95 mA
17
pF
Capacitance @ Vak = 0 V (Note 4)
C
70
pF
1. Ireg(SS) steady state is the voltage (Vak) applied for a time duration ⥠80 sec, using FRâ4 @ 300 mm2 2 oz. Copper traces, in still air.
2. Voverhead = Vin â VLEDs. Voverhead is typical value for 65% Ireg(SS).
3. Ireg(P) nonârepetitive pulse test. Pulse width t ⤠1 msec.
4. f = 1 MHz, 0.02 V RMS.
Figure 1. CCR VoltageâCurrent Characteristic
http://onsemi.com
2
|
▷ |