NRVBD1035CTL Datasheet, PDF (2/6 Pages) ON Semiconductor – SWITCHMODE Schottky Power Rectifier

NRVBD1035CTL
MAXIMUM RATINGS
Rating
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
Symbol
V_RRM
V_RWM
V_R
Value
Unit
35
V
Average Rectified Forward Current
(At Rated V_R, T_C = 115°C)
Per Leg
Per Package
Peak Repetitive Forward Current
(At Rated V_R, Square Wave, 20 kHz, T_C = 115°C)
Per Leg
Non−Repetitive Peak Surge Current
Per Package
(Surge applied at rated load conditions, halfwave, single phase, 60 Hz)
I_O
I_FRM
I_FSM
5.0
A
10
10
A
50
A
Storage / Operating Case Temperature
T_stg, T_c
−55 to +150
°C
Operating Junction Temperature (Note 1)
T_J
−55 to +150
°C
Voltage Rate of Change (Rated V_R, T_J = 25°C)
dv/dt
10,000
V/ms
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
1. The heat generated must be less than the thermal conductivity from Junction−to−Ambient: dP_D/dT_J < 1/R_qJA.
THERMAL CHARACTERISTICS
Thermal Resistance, Junction−to−Case
Thermal Resistance, Junction−to−Ambient (Note 2)
Per Leg
Per Leg
R_qJC
R_qJA
3.0
°C/W
137
°C/W
ELECTRICAL CHARACTERISTICS
Maximum Instantaneous Forward Voltage (Note 3)
(See Figure 2)
I_F = 5 Amps, T_J = 25°C
I_F = 5 Amps, T_J = 100°C
I_F = 10 Amps, T_J = 25°C
I_F = 10 Amps, T_J = 100°C
Per Leg
Maximum Instantaneous Reverse Current (Note 3)
(See Figure 4)
(V_R = 35 V, T_J = 25°C)
(V_R = 35 V, T_J = 100°C)
(V_R = 17.5 V, T_J = 25°C)
(V_R = 17.5 V, T_J = 100°C)
Per Leg
2. Rating applies when using minimum pad size, FR4 PC Board
3. Pulse Test: Pulse Width ≤ 250 ms, Duty Cycle ≤ 2.0%
V_F
V
0.47
0.41
0.56
0.55
I_R
mA
2.0
30
0.20
5.0
ORDERING INFORMATION
Device
Package
Shipping^†
NRVBD1035CTLT4G
DPAK
(Pb−Free)
2500 Units / Tape & Reel
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
http://onsemi.com
2