NLX2G17 Datasheet, PDF (2/8 Pages) ON Semiconductor – Dual Schmitt-Trigger Buffer

NLX2G17
MAXIMUM RATINGS
Symbol
Parameter
Value
Unit
V_CC
V_IN
V_OUT
I_IK
I_OK
I_O
I_CC
I_GND
T_STG
T_L
T_J
MSL
DC Supply Voltage
DC Input Voltage
DC Output Voltage
DC Input Diode Current
DC Output Diode Current
DC Output Source/Sink Current
DC Supply Current Per Supply Pin
DC Ground Current per Ground Pin
Storage Temperature Range
Lead Temperature, 1 mm from Case for 10 Seconds
Junction Temperature Under Bias
Moisture Sensitivity
V_IN < GND
V_OUT < GND
-0.5 to +7.0
V
-0.5 to +7.0
V
-0.5 to +7.0
V
-50
mA
-50
mA
±50
mA
±100
mA
±100
mA
-65 to +150
°C
260
°C
150
°C
Level 1
F_R
Flammability Rating Oxygen
Index: 28 to 34
UL 94 V-0 @ 0.125 in
I_LATCHUP Latchup Performance Above V_CC and Below GND at 125 °C (Note 5)
±500
mA
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
1. Measured with minimum pad spacing on an FR4 board, using 10 mm-by-1 inch, 2 ounce copper trace no air flow.
2. Tested to EIA/JESD22-A114-A.
3. Tested to EIA/UESD22-A115-A.
4. Tested to JESD22-C101-A.
5. Tested to EIA / JESD78.
RECOMMENDED OPERATING CONDITIONS
Symbol
Parameter
V_CC
V_IN
V_OUT
T_A
Dt/DV
Positive DC Supply Voltage
Digital Input Voltage
Output Voltage
Operating Free-Air Temperature
Input Transition Rise or Fall Rate
V_CC = 2.5 V ± 0.2 V
V_CC = 3.3 V ± 0.3 V
V_CC = 5.0 V ± 0.5 V
Min
Max
Unit
1.65
5.5
V
0
5.5
V
0
5.5
V
-55
+125
°C
0
No Limit ns/V
0
No Limit
0
No Limit
http://onsemi.com
2